Speed Boost for Your 3D Printer!

Steven printed this big benchy in under 90 minutes on an Ender 3 without compromising its quality! #shorts

Keep up with us on social media!

3DQue Systems is a technology startup that is focused on automating 3D printers to make high-volume production and innovation available to engineers, entrepreneurs, and makers around the world. With our YouTube channel Automated 3D Printing - a great resource for people interested in high-volume production using 3D printers!

[BurgerSoda]

Anybody that doesn't want to watch a 2 hour livestream, I got you.

Cura settings:

speed: 50 mm/s

infill speed: 250 mm/s

inner wall speed: 250 mm/s

outer wall: 80 mm/s

travel speed: 300 mm/s


Experimental:

bridge settings: on > default

fuzzy skin: off

small hole max size: 5.0 mm

IF YOU ARE DOING A PRINT IN PLACE MODEL:

horizontal expansion: -0.02%

This helps prevent parts fusing together. They might still fuse together if you max out the speed.

[jccraftmage]

Any way you could just tell us so I don't have to watch a Livestream rerun....

[CodeMasterCody]

I tried 7k acceleration 150mms with the ender 3 and it skips on the belts on the bed.
I use 1850 acceleration and 150mms with 2500 acceleration for the inside wall.

[francisnitsch-jones]

you need to bump up your accel to actualy get to those speeds. I print as standard at 300mm/s at 35k accel, that is actually reaching those speeds very quickly and is very much faster than this. This is maybe reaching 100mm/s but I highly doubt much more than that.

[luckysbeats]

I’ll try this out. Tomorrow I will get my first 3d printer, which is an elegoo Neptune 3 Pro

[aluzuka]

i’ve got a K1 and it’s done in 11 mins

[claudiop.]

Time is money and 2+ hours livestream is such a waste of time, those are not 250mms and external perimeters will be full of ringing without input shaping. You should do a 20 minutes video like normal youtubers and maybe sponsor it

[C_D_PRINTING]

For those thinking you can just print this fast stock on an Ender 3 you wrong. You have to have the right equipment like better cooling hardened nozzle and all metal hotend.

[xiar]

And it’s not even possible to do that on an ender 3 with the stock hotend since it can only handle 8 cubic flow. 250mm/s with 0.2mm layer height and 0.4 line width would be 20 cubic flow. Plus you’re not even reaching that 250mm/s due to the default accel on an ender 3 being so astronomically low.

[Jimmy_Neutron]

Which surface u are using above your bed ?

[mysticmarble]

Is that a capacitive proximity sensor or inductive ? It kinda looks too thick to be inductive.

Also I'm not sure if the bed is glass and therefore capacitive.

[ipmate]

Who uses manual leveling in this age lmao

[NagashiChidorii]

This is freaking slow dude. I can do a bench in 30-40 minutes

[rawrbeastgr]

No and neither can yours. Speed isn't true if it's not able to accelerate to the actual speed. And a true 250mm/s would skip steps on a bed slinger.

[CGK]

lol ya you're not hitting those speeds fully. Come back when it's a switchwire w/ canbus. zzzz