Flush Mount vs. Recessed lighting… 🤔

SUBSCRIBE to avoid homeowner Mistakes... 😅

✅The Ultimate Home Building Checklist✅
www.BuilderBrigade .com/Social

Flush mount and recessed LED lighting have different installation methods that can impact the way lighting changes in a room.

Flush mount LED lighting fixtures are installed directly onto the ceiling surface, making them a visible part of the ceiling. The light output from flush mount fixtures is typically more even and diffuse, as the fixture is designed to distribute the light evenly across the ceiling. This can create a more general lighting effect that illuminates the entire room uniformly.

On the other hand, recessed LED lighting fixtures are installed into the ceiling, with only the trim or bezel of the fixture visible on the surface. Because of this, recessed lighting can create a more focused, directional lighting effect that can highlight specific areas or features in a room. The light output from recessed fixtures can also be more intense and concentrated, creating a more dramatic effect.

Overall, the choice between flush mount and recessed LED lighting largely depends on the desired lighting effect and the specific design goals of the space. While flush mount fixtures can provide a more general lighting effect, recessed fixtures are better suited for creating targeted lighting effects or highlighting specific design features.

Builder Brigade, Home building tips, new home construction, new construction, home building, home builder, new home, new home ideas, new home construction checklist, home building checklist, home checklist, house plans, new house plans, home design, new construction homes, construction, building a house, house tour, home inspiration, modern home, farmhouse, house design, home building help for homeowners

[JsGarage]

I like the flush panels like on the left. They light rooms up more eventually with better coverage. Right side is cool for specific more dramatic lighting IMO.

[adatshhc]

Different applications for different rooms and situations. That is why they sell both.

[shrimpinpat]

But flush will give a more even light throughout recessed will give more concentrated areas of light. Id prefer less light but cleaner and smoother

[tylercopeland]

Flush mount = glare bomb. Same with a fancy old school Edison filament bulb in a decorative fixture with a glass canopy. If you’re interested google “lighting design” it’s a complicated subject. But if done correctly makes a room look awesome. Layer with light is the main concept. Also google TADA

[Smokeey]

I don't want spotlights i need the light everywhere like the recessed ones.

[zadaakusaido]

Look at all that light….being thrown on a tiny spot on the floor. Different installations for different uses. Flood vs Spot.

[JoseSorianoPhotography]

That is a very wrong concept. You are talking about direction and shape. One is flooded, and the other one is more direction that in my opinion is not about the output but the softness. A flush light make s softer light that is more pleasant

[AZ-umoz]

I bought into the anti late property of the recessed downlights, yes, less glare, but guess what, you dont see them because they cover far less areas. The beam angle is much smaller, my wife told me it felt more like an interrogation light lol

[adamschomaker]

Think of a mix for these. Spot on outside of great room but the wide in the middle area. Keep them on different switches so you can control each zone separately. wide would be good for kitchen and bathroom as well as basement general areas.

[Just-Jakes]

The regressed light is being focused and has a smaller footprint. The flush mount has a wider footprint and is less focused. IMO it makes more sense to have flush mount lights for most interior lighting applications. They are also often easier to install than many recessed lights.

[cameronharris]

Lots of comments here of people that don't understand. A flush light in LED will throw the light directly into your eyeballs from all angles. IT is harsh and unpleasant. You do not need full light from every angle in your house. The deep recessed ones throw plenty of light

[roberte.]

but isnt this really a case a matching the light you want to the fixture you use? for example, for general lighting in a bedroom, you'd want the flush mount because it diffuses the light throughout the room. if you wanted to highlight a feature in the room, like a piece of art, or a chair, however, you'd use the recess, because it casts it light in a sharper, but more limited area.

[arkadandfortuna]

I don’t get it, the left image looks like the better quality one
There’s more light area… just saying 😊

[smashcutlass]

Completely different optics has nothing to do with the light being recessed higher into the ceiling. It’s all about the LED optics and beam angle. You will get the result you want when choosing the proper fixture.

[bushnj]

This is a great example of how wafer recess light wash out. they work good for something like a basement or a room that will have more sources of layers lights like a table light, floor lights but I prefer the can housing lights as they tend to be more warmer and are great for high task rooms like a kitchens.

[collinthomas]

The reduced glare is the most impressive thing. They could be tricking you there because of a narrow beam spread bulb.

[krupanaik]

Which one is good for high ceiling living room vs low ceiling bonus room, bedrooms, kitchen ?

[flyandshy]

Track lights is the answer. They can lit up wide areas, you can move the lamp to whichever side you want.

[merchanthandson]

I think it the parts itself. The flush mount dont have reflector behind the bulbs. While the regressed has reflector around the light bulb like flashlight. Idk just maybe.

[k]

Flush definitely covers way more this is horrible example do this test in a bigger area