INPA, NCS Expert, WinKFP, Tool32: EASY BMW Installation Guide

Use BMW Standard Tools software to work on your BMW at home!

LINKS:

Want to help the channel grow?

SUPPLIES USED:
• Windows 7 or better laptop with a charging cable
• K+DCAN cable with a switch
• 20 Pin Adapter Cable
• And installer files from my Google Drive

**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

[javierherrera]

I just installed and set this software up to use on my 2011 328i xdrive. I was having connection issues with car and software until I tried this. First verify that the Comm settings are correct as per the video. Start Inpa first, connect cable to laptop, turn power on in the car, lastly connect obd connector to the car. This was the only way I could get my e90 connected. The software had no issues and it works great 👍

Super big thank you to Endless Money Pits for providing access to the software and making a well explained video. You saved me tons of money and Subscribed👌

[t-hor]

I don’t think u realise how good of a tutorial this is! I know it’s the same steps as what Bali wrote up, but it makes so much more sense watching the whole process like this. Thank u, and Bali, for making this process so easy

[PadmaDorjee]

Mate, I cant believe how easy you made this look. I have owned an E46 for 8 years snd have been trying to learn inpa for at least 4 years but never understood it, till now! THANK YOU so much for doing this.

[billmurrin]

Thank you for your step by step installation of BMW diagnostic tools. This was very easy for me to follow and it worked perfectly. Now I just need to install ISTA+

[yngelly]

probably one of best tutorials if not the I’ve watched out of rest of them on YouTube. GOODLOOKS

[shaynek]

Followed instructions and it worked and it's the most stable installation of INPA I've used.

[HandHaben]

Bro you're a legend. I used Mikes BMW tools initially from another video, however, when I loaded NCS, expertmode was nowhere to be found (and I needed that for the coding I wanted to do). Followed your instructions and initially I tried to connect my car to NCS expert but kept getting the error 'chassis faulty' error. I ran the BMW coding tools software, and bam.. updated all of my programmes. Succesfully retrofitted cruise control to my 2005 pre-lci E87 with no warning lights and cruise display. Thanks!

[speciallynobody]

If you still have trouble connecting try to change the BM latency to 1msec (on the advanced settings window below COM port number). This fixed it for me.

[arkmay]

Awesome, I was able to fix the airbag light on my 2005 X3! Thank you so much.

[johnmarek]

Thank you, been looking for a decent tutorial for quite a while, much apricated.

[chadhipwell]

Works perfectly thanks. I appreciate you uploading it. I had no issues at all getting it to work on an old Laptop running W7.

[dannymatthews]

With regard to NCS Expert/INPA, this is without a doubt the best instructional video and software download on Youtube. I have tried several and never found as complete, smooth and flawless install. Thank you for and excellent

[Random.Adventures.]

This was an awesome tutorial everything explained perfectly.

[ozankara]

cleanest representation on the internet, thank you!

[brianwolthers]

you are a legend, Best description of how to install.

[FanniCSIe]

Brooo…
Thanks a lot,
You did a great job with this tutorial,
I’ve been looking for this!

I’ve bought a dcan cable, and they given me a 170gb folder to play with, and their instructions were way over my understanding 😢

Thankfully this video helped me!


I wish You all the best!❤

[joroboga]

Anybody else getting an error VIN is faulty while trying to use NCS Expert?

[cooly]

Thank you so much, God bless you
Worked perfectly E39 👍🏽
Is there a chance to get the code errors in English language ?

[brendanharris]

Worked like a charm first time around. Thank you for making it so simply! Now to try and update my DME

[MustangGT]

I have Windows 11 and had to install the software by typing "Run programs made ofr previous versions of Windows" in the search bar. Then I selected "Not Listed" and selected the setup file. Not sure if anyone else had this issue.