How to Sand quickly. Slow vs fast #sanding #deck

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

I would rather eat a bucket of cow shit than sand a whole deck with a palm sander

clownmoshpit
Автор

Getting paid by the hour vs getting paid by the job

Cartmanchill
Автор

so...I've sanded many decks. If you think floor sander is the answer I promise you it's not. The problem with decks that need this job is that they have been in the weather so they are no longer perfectly flat. All the boards are warped with raised edges. So it's very difficult to get the floor sander to even sand a single plank thoroughly. To make matters worse. the abrasive pads on the bottom of the floor sander always get caught between the boards. It's easier to remove the boards individually and run them through a drum sander. But removing the boards can be destructive.

victorduncker
Автор

I thought they we’re going to use a finished floor belt sander

davidwright
Автор

Use an angle grinder with diamond disc . Excellent result and fast

marlonmendes
Автор

You can get one of those polishing sanders for floors and put grit paper under you would be done so much faster

aleccarrillo
Автор

Actually, a 6 inch sander and then a 6 inch sander on a pole do the same work……

briansnc
Автор

I just used orbital sander, better control using sand though.... but great idea for first pass.

mototaco
Автор

All smart asses who recommended to rent a floor sander - you obviously never sanded a deck.. deck surface is never superflat like the house hardwood floor - if you use a floor sander on a deck you either gonna remove old finish in spots here and there and it not gonna do the job as you thought or you just destroy the deck if you gonna remove level after level of the finnish with a half of thickness of the deck boards.. for this kinda job you have to use a chemical stripper then power wash and light sanding..

rssknn
Автор

can you show me how to make one pls the broom sander

jacksonvang
Автор

Goodness an orbital sander for a whole deck! Thats dedication

rearviewviewer
Автор

Whoa, wait a minute buddy, I gotta smaller sander you can use, get that job done right quick !

eltsennestle
Автор

OK, where can I find the fitting to attach the pole? I don't have a ton of deck to sand. New deck and i just want to take off rough spots and the board ink. I have a terrible back so the pole idea looks great!

tinamarieb
Автор

Try diamabrush on an angle grinder is way faster.

jasonluong
Автор

How did you do I had the same idea but dont know how to implement it!

Tony-hxfj
Автор

Both of those are so wrong. Go to the beach, get a bucket of sand then throw it on the deck, sanded in no time flat and you had a family getaway to the beach

jaep
Автор

The ironic title itself explains why these dinks are using a tiny orbital sander to do a job that could take other industrial sanders a fraction of the time to do the job.. i feel bad for the customer who probably got ass rammed with the bill

Tea_Scott
Автор

I’m going re-stain my deck but can’t I just use a power washer to get the small layer of mold off and then stain it? Do I absolutely have to send it too?

Roadz
Автор

Lol dang that's how Ibwas going to do mine! 😅

valeriegriego
Автор

Doing 20+ square feet of anything will have you looking for easier ways, currently have my heat gun strapped to a little jury rigged carrier to hold it in the right position so i can strip paint off my campers roof twice as fast and with half the effort.

zachmiller