PT. 4 Free Energy Neodymium Magnet Motor Generator Build Magnet Placement 3/25/2022

When putting the magnets in place be careful of the strength of the magnets. As you can see turning on the lathe at a decent RPM the magnets stay attached while spinning.
The next step is to epoxy encapsulate in place to become a permanent part of the rotor.

After looking at the plastic spacer we are going to allow some of the plastic to be trimmed off so we have as much epoxy coming in contact with the underside of the magnet facing the rotor. The spacer is made from plastic still will be used but trimming will allows more epoxy to come in contact with more of the bottom surface of the magnet to guarantee proper bonding to the magnet surface.
Today 3/26/2022 we just purchase large quantities per bottle of epoxy A and B that will be used in securing the magnets in place. We purchased it at Michaels craft and hobby supplies here in Southgate Michigan.

[MehmetBoysal]

After all the efforts you put into this project, I am sure you tested the alternator, right? So what were the results got? Would you care to share it?

[HalenLowman]

Just take the electro magnet out of the rotor and put a speaker magnet in there. It alredy has a hole in it

[tiarobertsingo]

hi I just discovered your video and I am very impressed by your invention. after my research I discovered that there are several grades of permanent magnets. please which grade did you use, N50 or the N52. THANKS

[cirodigiovanni]

Hi Peter how are you ? Please can you give information where you buy the arc Neodymium magnet [ is N52? ]
Thank you good work 👏

[warasangu.]

Can you give the specifications of the magnets please?

[johnM-Jr]

he said once in a live that he had wrapped the outside where the neodymium mags are w a layer of his special alloy sheet. it was under the black elec tape.

[johnM-Jr]

I can see one thing they did that is different on yours. But you are doing nice work. Interested to see how yours works.

[thusharaedirisinghe]

I hop you finished your generator work.

[nathaniel]

Knowledge either you have it or you need time 🤠

[newmeify]

good .. but what after epoxy encapsulate in place to become a permanent part of the rotor what we will get from all that

[michelgrenier]

Better to keep the zigzag configuration as the originals poles ?
Tests should be done.
You can have also output from the brushes from the original coillso can be used to enter a modulation carrier and output coils coils can be set in resonance with parallel capacitor on each phases.

[wolfman]

Where you did buy this size magned :) i want buy some

[charlesteets]

U must work for people tht keeps this under wraps I've done this it does work believe me or don't care either way

[aremaka]

Hello sir. Thanks for your video.
Can you please let me know where did you buy the magnets? If you share a link that would be very helpful. What are the dimensions of the magnets?
Thank you in advance. I am at the same stage as you but I've ordered the wrong size magnets 😂

[hotoderschrott]

what are the values of these magnets and where did you buy them?

[MechanicForGMCCars]

What wuld hapen sir If you use magnets and that coil together?
Wuld the rotor be more power full? Ore wuld it do nothing cancel ich other out?

[mteca]

Tesla said 12 was magic number to magnets in a motor...also something about them all facing north...also 13 coils

[traBylliB]

Enjoy your dream! One morning you're going to wake up and "POOF!!"

[Kuxukismail.]

hello, I will have a question about the servo motor, can you write an e-mail

[rodrigo_infl]

Me faltó el pegamento 😭 lo bueno ya tengo todo preparado los imanes están en camino lo tiste es que me quedé sin trabajo solo me faltó eso