how to set your arrma 4x4 3s & 4s slipper cluch, no more problems!

in this video I show you my secret to setting up arrma 3s & 4s 4x4 blx slipper cluch assembly.. this is a neat trick that prolongs the life of you slipper cluch hub. you can also use old wore out cluch hubs that would normally be thrown in the trash. I show how to use the slipper cluch maintenance set and what todo with that little extra specialty nut & how it could save you money and time.. thanks you for watching ironcladrc. Tinker test and tune every thing rc. don't for get to subscribe

[riffraff]

Finally a video that shows how much the slipper clutch should slip. Thank you. Only video that shows how it should slip.

[tyrellcorp]

Very detailed and the result of lots of experience. That’s how I set my tightness as well. Sanding the spring is a new idea. Maybe just lye or easy off oven spray could make it easier.

[biggnasty]

Subscribed! Why? Because you are real AF homie!!!! You are the only one out of the youtube rc wrenchers who give USEFUL information. I'm doing this work on my living room floor homie, and your tips got me back up and running. Thanks bro!

[norcalrc]

Good knowledge bro. Thanks for sharing. One quick note, if you don’t want to reduce the size of ‘specialty nut’ and input shaft, you can order Arrma’s new short input shaft that compensates for the new slipper hardware. Love your videos bro

[MJ-gqnv]

Black moly moly 1/2:3n1 slicker than snot I use ing it for ring pinyon grunt and rear the modified safety nut is the shit, great content bro 💯 likes in the future for quality I'm in 👌

[andrewfrost]

Hi I just replaced mine with a differential you'll love it balances out the power front the rear launches out of the hole like crazy and no more wheelies.

[davidmackgutierrezjr]

Genius idea. I tried it and it really works in all your videos got good content in them it was a quick good fix I like it

[doogidunrite]

I've done this with my senton I've upgraded to a 3s system and all it does is spin the slipper. I glued the plates to the hubs and now it just burns up pinion gears. I had no problems out of the plastic spur and stock slipper set up. I put in the metal 57t and nothing but problems.

[donniemarks]

I reused the stock clutch pads on a hot racing steel spur for my vorteks 3s and it slip’s really bad, I think I need too use different pads and use 4 pretty sure I only installed 3 pads

[RittenhouseLifestyle]

I am new to all this, I purchased an aluminum motor mount, center block support. The piece that slides out with strap. Then it came with a slipper spool all steel. But the spur they gave me is 57T, the vendetta has a 50T. So I want to swap the 50T on the all new steel slipper spool. So this should help a lot. I don’t know shit about “shimming” or nothing. I may break it.

[mpeezy]

Great vid bro, I appreciate the help. I especially liked the, "that's what she said" comment. Subscribed.

[DelightedCuttz]

Definitely need one like this for speed runs and dirt track racing with the guys ..#ccrc

[rqcevki]

I cut it and half with a razor and I didn’t have to trim the end where the motor goes cause it fit all the way in now just got to change my clutch slipper pads and it’s good as new

[barrettalen]

Awesome thanks for the great info 👍 😀 what gears should I use to make my 3s Typhon with some Hoons get to scooting?

[rocket]

ive been running my big rock for a while im hearing screetching louder sound from slipper area? what needs replacing?

[TheTylerjoy]

I Have The Vendetta & My Buddy Has The Infraction, We Both Running 4s, We Race On A Parking Lot, So If Tighteen My Slipper Clutch Just A Little Bit, I Will Have A Better Take Off, On The Corners Or Turns, Right??

[surfside]

Subbed😂
Wish i had watched first.
Bought 2 HR pads instead of 3.🤦‍♂️ is it ok to mix composite and aluminum pads?

[robertrodrigues]

Now I got a metal spur, but now it's grinding again I'm thinking it's the front differential since it grind when doing wheelie

[hotracinghelpdesk]

Great content. This is a good wisdom sharing vid. Thank you.

[fiercetatsu]

My Home Depot Has the same set screw it’s a M2.5x25mm cap head screw but any screw with the same diameter and and a length of at least 20mm works the same I’ve had better luck with a Phillips head that’s 20mm than the ones arrma provides