Fitting AccuSpark Electronic Ignition conversion Kit

How to fit the AccuSpark Electronic igniiton system

[nosay]

3 years fitted to my 1967 4 cylinder Rover P6. The inside of the cap still looks new and the car hasn't missed a beat. Brilliant product!!

[jorologo]

I bought one of these from you.
A great investment.
My VW Beetle has never run better.

[donthuis]

Indeed very easy to place inside a MGB Lucas 45D distributor, if you buy the set with two variants: one ring and the ring + rotor combined. For the newer one of my distributors, I bought the set with only the ring and it did not fit, while the combination package I bought afterwards did. So I now keep the fixed part of my first set as spare, because if an Accuspark unit ever fails I expect this not to happen in the rotating part, but in the fixed part with its electronics inside.

[accuspark]

The scale represents the scale that will be on your engine, the needle is the mark on the crankshaft .
we charge around £15.00- £25 for fitting . but 1 Hour would be the maximum labour you should pay .

[TheBigPilgrim]

apologies if the question sounds stupid - but how do i check the timing with the distributor still in the car? guy in the video looked at the meter on that machine???
How much does fitting cost? i might decide to have it fitted as i don't want to mess up the timing...

[nissanasiri]

Does it fit for all distributors?? Or should i buy one according to my car modal??

[jonathan]

check if you have spark form the primary wire ( the one that comes from the coil) and if you got spark, fuel and compression it should start, if still doesn't have a buddy to crank the engine while you turn your distributor a little bit, every time you crank it, live it cool down for 10 minutes a least and crank it again until it starts, take care of ur starter motor, good luck, feel free and ask me about any doubt...

[accuspark]

You should contact Accuspark or your dealer if you have a problem

[lortati]

Is it appropriate to salute 1975 Opel Kadett C 1.2 engine

[munovz]

Very nice, can you tell me if is good for my Citroen GS 4 cyl boxer, ducellier headcable

[jcko]

Is there a system for a 1.6 Mk1 Caddy? Bosch.

[accuspark]

distributor is £25.00 from our website accuspark.co.uk

[accuspark]

Hi, sorry we don't have a suitable kit for fiat 4 cyl

[malindags]

u didnt connect the ground wire to one of the screws

[accuspark]

I think you will find it was connected 3 mins in

[najazz]

Hi..Im restoring my vw 1303 and interested in the electric conversion kit.How much do they cost and will it be possible to ship to Nairobi.

[accuspark]

Hello you need to purchase the correct kit for your car, see our website, accuspark.co.uk