Alternator wiring gm

In this video i will show you how to re-wire your gm delco remy cs 130 or any newer cs alternator. The wiring in my pickup truck was bad and mostly missing from a body swap and i converted to carb from tbi. I had trouble finding a diagram or any video so i thought i would make a proper video on how i wired it. Now it charges perfectly at 14.5 volts.

[jasonbright]

Thank you! My alternator has been getting ridiculously hot and had me do confused I bought this car this way for cheap but I'm going to try the light tomorrow. Thanks again for the idea

[truthaboveagenda]

When you spoke about the wiring madness that is your dashboard, i was glad to hear that. I’m fixing up a 20 year old toyota, and have easily quadrupled my hands on abilities in about 5 months that i have owned it, i’m enjoying learning the different systems, very much.
However, even on this twenty year old car, the wiring is insane: alarm system, air bag sensors, electric windows, electronic sensors...
As i go along, i’m tearing out all the non-essentials, such as the broken air conditioning.
Hope you do well with your rebuilds, i appreciate your ingenuity, cool truck.

[Campcustommotorizedbikes]

Bro. I did the 4.3 to carb.. because of you.. thank u.. so much for your videos.. now am having the same alternator problem..

[copperhead]

I can't thank you enough for this video, I was trying to earth the other terminal of the warning light until I saw this. Thanks very much.

[maichelle]

I learned something thank you I’m 60 years old femal retiring my 64 gmc wood truck

[tjs_welding_and_fabrication]

Thanks for showing this. Putting a bbc in a 79 gmc 1 ton. Upgrading to serpentine and found the same style alternator.

[itstherightone]

Thank you Señor. This was extremely helpful. If you put LED light bulbs in your dash its best if you remove them.

[warbed]

Thanks, had mine hooked up just like yours. could not get it to energize, was working when I first installed but after dash work stopped working. Found out that you can't use LED lights for the alternator since there is not enough resistance to energize the field.

[alexisrivera]

This was super helpful. I have the same motor, carved also and a 53 truck. Thank you

[thomasshirley]

Thank you so much i needed this to fix my car same set up thank you brother and God bless you

[pigpen]

Thank you so much I looked all day at posts and forums and what not and all I needed to know was which slot the pink wire went into thanks

[premez]

Awesome Video, Bro!!
May Jesus Bless You, Brother
For Sharing!!

[the.unhappy.mechanic]

I was wondering if the 1960's style ballast resistor from dodge or gm would work, thank you for that, I'm going serpentine with my 1966 buick gs. And I have a parts truck 1997 suburban, so thank you for letting me know that i do not have to buy the ls style delpi alternator. when the suburban is still kinda new. The suburban I got for free but it has a big hole in the side of the engine. So the accessories still work just fine, just not the engine.

[dirtydave]

Very helpful I was having the same issue. Thank you.

[tomference]

How do you wire in the bulb or diode?
"L" wire goes to one wire of the bulb, where does it go from the bulb??

[johnmarcelina]

You need a new serp like it's seen much better days. 😆

[alchemy]

The "F" field to the 'regular" ignition switch. And the "L" ( line?) to ignition switch as opposed to "regular" ignition switch.
Did I miss something. Thank you, got it.

[tweed]

does the big cable on the back of the alternator go to positive on battery? dont seem to do anything on negavive.

[tomference]

I do not understand when you say the otherside of the bulb runs to the ignition, ..like where on the ignition switch? There are numerous terminals.
Pardon my ignorance.

[dheujsnrhfydhehehshshhdggsd]

thank you. appreciated the upload was helpful to me.