Delphi DS150e Repair. Vehicle not responding.Delphi no connection with Opel. BMW and Truck (LKW)

This is a Change that will cost nothing and in 80 percent it Works.
I made this change 4-5 years ago, when I was using something like this and I was able to read the 2010 Opel Insignia
Of course, to make a complete Rework, you need to replace a few Chips, Resistor, Diodes with original parts produced in Japan or the USA. I will make such a video in the future if you are interested.

Dies ist eine Änderung, die nichts kostet und in 80 Prozent funktioniert.
Ich habe diese Änderung vor 4-5 Jahren vorgenommen, als ich so etwas benutzte und den Opel Insignia 2010 lesen konnte
Um eine vollständige Überarbeitung durchzuführen, müssen Sie natürlich einige Chips, Widerstände und Dioden durch Originalteile ersetzen, die in Japan oder den USA hergestellt wurden. Ich werde in Zukunft ein solches Video machen, wenn Sie interessiert sind.

[milorossi]

Hello. I bought a Chinese clone and with my opel astra h it can't communicate with some ecu (airbag, cim ecc), while with engine communication is OK. Any suggestions? Thanks

[ORHANALEMDAR]

Hello, I have 2 DS150s, my own device can connect to the vehicle with 2021.11, but what could be the reason why the newly purchased DS150 device cannot connect to the vehicle?

[losien]

I’ve got a PCB that says TCS MAIN V9.0 with original FTDI, upper board has a processor and orange nec relays. How to make it better? Do i need to remove these D701 and D703 diodes? Are there any mods needed on my ds150e ? Thanks

[badrc]

Hi, do you still recommend to get the V3 PCB? I rarely use mine so I don't know if I might need it. What is your opinion? Thanks

[srbskipas]

Can you tell me what components do I have to change beside this zener diodes. We are talking about double board tcs man v3

[markasare]

Pls can u desmostrate to me on how to use it to check MAN TGS injector values.?

[danielsatko-]

not mentioned that CAN dont have filter and overvoltage protection which mostly died

[MarinTheFirestarter]

Hello. My diag died no light after connecting to defect car. Probably shorted. Whitch protective element to replace?

[djflashhflash]

Hi wi l this solve k-line comunication ? I've tried mine on vw passat 1.9 tdi, audi a4 1.9 tdi it's communicating with every module on the car except engine

[ocd]

Im still getting vehicle not responding, its a 2 board v3. any help would be appreciated

[ronitmanojcumar]

hi, does this fix work from MAN TGA Connection?

[albatoruz]

Hi, i got myself a cheap aliexpress one and out of the box it doesn't work, ill wait for the refund process to go thru and then id like to try and repair it, or order a new one. Do you have any links to a known good seller who ships working products?

[fteam]

Hallo, kannst du bitte verlinken diese zener dioden 30v. Oder eine genaue bezeichnug.

[misteriitaliani]

hi dear u use single board, double board interface? i have one and not work in mercedes...if possible have link where to buy and wich model tks

[borce]

Hi, can i bay that repear parts from aliexpress and do u have some diagnostic tool for sale?

[MA-kcrs]

ON Semiconductor Standarddiode 1N4148_T50R DO-204AH 100 V 200 mA

I used this but not working on BMW E46 320d 136hp Diesel with 20pin ODB

[TOMA]

For me this did not work, afterwords I even lost some functionality that I initially had. For example before I could read Airbag computer on some cars, with this modification I can't anymore, so I have to return the diodes...