Source Audio MIDI Adapter: Tutorial Demo

preview_player
Показать описание
The Source Audio MIDI Adapter brings full MIDI capabilities to all Source Audio single footswitch One Series pedals like the C4 Synth, Atlas Compressor, Spectrum Intelligent Filter, and Ultrawave Multiband Processors.

Рекомендации по теме
Комментарии
Автор

I was just about to buy a True Spring in the past couple days, but I have been hesitant because the lack of midi control when it seemed so close to being capable of it with the neuro editor made it seem a bit unappealing. Then you guys release this, and now it's a surefire purchase. Way to go!

tshoob
Автор

Hi there ! using that adapter with an After Sock, it works but :
- the TRS-DiN cable coming with it, fine ! but it's female DiN so it can't plug directly in a midi master pedal. Boss cable TRS-DiN (male) does the job (had one fortunately)
- The MiDi command for CC messages are fine as explained in 7:40
- The Midi command PC messages that change preset as on the right side of the screen at 7:50 are a bit weird on my After Shock that have only 6 entries. PC will be setup 0 to 5 . Then 0 is the 4th in the list, 1, the 5th and 2 the 6Th, then 3 the 1st, 4 the 2nd and 5 the 3rd, a bit confusing but works fine.

refractorymercury
Автор

So my question is, can we send MIDI note on/off to C4 synth to trigger synth engine?

MateuszJagocha
Автор

Can't wait to put this on my pedalboard to control my C4 instead of the other USB Midi Host that doesn't have midi through. The output of this Midi Adapter is just a regular midi signal right? So I can hook it up other brand's products.

DIYguitarGuy
Автор

My Disaster Area Micro already works to control my C4 pedal, so I would like to know if there's a benefit to me with this cool new device. 🤔

allendesomer
Автор

Are there any performance advantages to using this for Midi vs using the Hub?

audiohub
Автор

The one flaw about this midi adapter is that it should be a 5 pin din male so that it could be connected directly to midi foot switch controllers like the Soleman or DMC.mirco Pro, both of which seem to have 5 pin midi female inserts.

skineyemin
Автор

Will this work with a standard MIDI to mini Jack cable? Or do I have to have the box? Thx. It’s just for PC changes

TheGuitarEffect
Автор

@sourceaudio will this work with a properly wired TRS cable instead of a 5 pin DIN? I'd love to be able to do this with a True Spring, but instead of using a giant 5 pin DIN connector use a TRS cable hooked up to my Morningstar MIDI Box.

tylermarshall
Автор

I'm using the one control crocodile tail loop 10 along with the one control crocEye for full control midi capability. How will I need to connect the vertigo pedal? I'm currently using 5 pin midi cables in this order, one control crocodile to crocEye to nemesis to free the tone reverb.

darrenfearis
Автор

how did they scroll thru 128 presets before this new adapter? the Morning star controller has 1/8 jacks so its seems like I might not need this adapter if I have a Morningstar controller? new to midi user here.

michaelangell
Автор

I have a morning star going to collider five pin. I want to buy the ultra wave. Can I just use a TRRS cable from the collider to ultra wave, for full midi capability, and not have to buy this?

brentmitchel
Автор

Can this be used for the Quad Cortex (meaning the QC controls the C4 synth?)

DanielMaat
Автор

HI!
My official Source Audio midi adapter starts blinking as soon as I connect it to the C4 pedal, even without any midi controller connected on the other side of the cable, is this normal?
In any case, I couldn't get it to work with my midi controller, I checked all the details.
Thanks in advance

kabassa
Автор

Can i download presets and and use it with fruty loops? What if I need to record a guitar and pedal?

megachoppawaaaghmetalproject
Автор

So I can control at least 2 pedals with one of these ??

Dariotoma
Автор

Does the ‘midi through jack’ only work with source audio pedals or can I send midi clock info though to other brand midi? … going into line 6 M5

jonzejones
Автор

What wasn't clear to me is how you assign a PC # to one of the stored presets. You showed CC messages in detail, but not PC messages. I just purchased the Gemini, and the manual doesn't describe it either.

rothsteinguitars
Автор

Could I use TRS to TRS midi instead of using the 5 pin adapter?

joeynone
Автор

Can you still use the expression pedal when using this? The socket is being used by this now so where does the expression plug in?

cjlister