Plasma Cutting Guide - How To Cut Perfect Circles, Shapes, Lines Easily - From Eastwood

The Eastwood Plasma Cutting Guide allows for easy cutting of straight lines,curves, radii, and circles with minimal finishing. The versatile center mount allows you to center the cutting guide for circles and radii using either a punch or drilling a hole. The circle attachment can cut up to a 17 inch diameter and down to a 3 3/4 inch diameter. This cutting guide was specifically designed to fit the Eastwood Versa Cut Plasma Cutter. This cutting guide will also work on other torches with a 0.95" Nozzle.

See it in-action in this video as we show you how it works, how easy it is to use and why you must have it for your plasma cutter.

[yogytodd]

I purchased a new plasma cutter from EastwoodCo and it works great. I am definetly going to get one of these someday.

[eastwoodco]

We've also found that users may not have the guide collar seated correctly on the torch or have it flipped upside down putting the torch tip too far from the surface. If mounted as the instructions list, you should have no problem striking an arc with the Versa-Cut plasma cutters.

[scottydntno]

I could watch this video for another 15min LOL I love metal working.

[eastwoodco]

The Eastwood Plasma Cutter has a High Frequency / Pilot Arc which means it's not necessary to touch the tip of the torch to the metal to begin cutting. We didn't have any problems while demonstrating the Plasma Cutter and Plasma Guide in this video. You must also make sure your settings on the plasma are correct for the material and thickness you are cutting and there shouldn't be any problems. Thanks for the interest. Hope this helps.

[eastwoodco]

Great use for a Plasma?  Are YOU an Eastwood Guy?  Check out this video from Eastwood to find out:  How To Open a Can Without a Can Opener - Perfect Soup Can Opener - Are You an Eastwood Guy?

[deozozh]

Can this cut Stainless steel plate 4mm?

[Colhchim]

Вот это приспособа, класс! Я себе такую же сделаю, только добавлю магнитную опору.

[eastwoodco]

A Link to Buy the Eastwood Plasma Cutting Guide is below the video. A link to get a Versa-Cut Plasma Cutter or more information is also below the video. Don't forget to subscribe to our videos.