iPhone SE 2(2020) “Important battery message” fix - battery replacement

After I made my custom iPhone SE 2 , I felt like it was incomplete. The battery health was disabled and I really wanted to fix this . Apple has encrypted the battery of iPhone XS and models above , so only the original BMS could work. I had to take it off from the original battery and weld it over new battery to make this work . This wouldn’t be possible without the help of additional tools and equipment like spot welder and battery programmer .

At the end the device was fully working and finally complete , the important battery message was removed and the battery health was once again showing.

Please do not attempt this repair as might lead to further damage to your device or injury!

#iphonerepair

Thank you for watching.

MUSIC CREDIT
---------------------------------
Digital Breath - ELFL

[christianm]

Hi. Thank you very much for this video. Could you write down a list of all extra tools that we need to succeed this additional process? Pleas answer this message with it. I’ll really appreciate it

[stankotomasic]

Any clue why iphone se2020 still reads old battery data after programming. JCID V1s reads 100% and original battery, but when i connect it to iphone it still reads old data.

[ekaterinablagoeva]

I love this channel. I’ve learned so much from it

[MrPlazman]

Good afternoon. I encountered such a problem and now I’m thinking about it and want to solve it, please help me with advice. I replaced the battery on the iPhone se 2020 with the transfer of the controller, reset the cycles and capacity on the jsid programmer, but after installation this battery is identified as not native 😢 ios 17.0.1. I tried all sorts of manipulations, but the dash in the volume on the phone does not determine who it belongs to. Thank you

[χαράλαμποςκουρτίδης-ψο]

does se 2020 not need a tag on to be rescheduled?

[smartoperator]

hi, can u share the link of ur JCID i have the same problem with SE 2 BAT so i tested on icopy but nothing run good, i search exaclty the same of u please : so many JCID dosen't have SE2 id with iphone 11 and i woud like to be sure

[kos-tik]

Do you have the links where i can buy all the products?
Thanks for the video

[vinodchauhan.]

भाई आप एक बार SE2020 में SE2022 की बैटरी डाल के वीडियो बनाओ ना भाई
एक बार प्लीज़

[Callowyo]

When I am reconnecting the board & spot welding, one side spot welded fine for me - but when I done a spot weld the other side it sparked, any idea why? I don’t think it joined either

[mohammedsaad]

Can I replace the iPhone SE 2020 battery using an iPhone SE 2022 battery?

[caffa_tech]

hi, do you need the tag on for iPhone SE 2020?

[pepspam]

Hi, very good video, i have some questions, what version of icopy is needed for iphone se 2020 swap battery?
In an other video here on youtube i seen that is necessary to install a new connector between the battery and the connector of the motherboard, this new connector is usefull to set the cycle to 0 maybe

[АлександрАлександрович-дсо]

Se 2020 это тот же 11 разе щлейфа jc не надо ?😊

[razvangrigore]

That programmer also has a copy battery data function, can that be used to copy the serial from one BMS to another (OEM batter), thus, removing the warning?

[liamomahony]

Would the phone work normal if the battery was installed without the original BMS, or does it affect the phone?

[phanisatyasai]

Will it show same battery serial number after doing this process in 3u tools?

[martinsk]

When i replace the battery on the 2016 version, i dont have this problem ? With bms.

[valtterivaananen]

Do I need tag on flex for newer models or does this method work for example iPhone 12 Pro?

[both]

Can I replace the iPhone SE 2020 battery using an iPhone 8 battery?

[rootsdat]

Can i restore iTunes to reset battery data instead of Jcid?