Keep Your Blackmagic Pyxis 6K SDI Output From Damaging

REMOVE ALL SDI CABLES BEFORE PLUGGING OR UNPLUGGING POWER.

Get 10% Off Dehancer Pro | Code: YOURFILMMAKER

👉 𝐅𝐨𝐥𝐥𝐨𝐰 𝐨𝐧 𝐦𝐲 𝐬𝐨𝐜𝐢𝐚𝐥 𝐦𝐞𝐝𝐢𝐚 :

𝐓𝐡𝐚𝐧𝐤 𝐲𝐨𝐮 𝐟𝐨𝐫 𝐰𝐚𝐭𝐜𝐡𝐢𝐧𝐠 𝐭𝐡𝐢𝐬 𝐯𝐢𝐝𝐞𝐨, 𝐜𝐥𝐢𝐜𝐤 𝐭𝐡𝐞 "𝐒𝐔𝐁𝐒𝐂𝐑𝐈𝐁𝐄" 𝐛𝐮𝐭𝐭𝐨𝐧 𝐭𝐨 𝐬𝐭𝐚𝐲 𝐜𝐨𝐧𝐧𝐞𝐜𝐭𝐞𝐝 𝐰𝐢𝐭𝐡 𝐭𝐡𝐢𝐬 𝐜𝐡𝐚𝐧𝐧𝐞𝐥.

============================
DISCLAIMERS
============================
The links in this description might be affiliate links. I may receive a small commission if you purchase a product or service with my links. There is no additional charge to you! Thank you for supporting my channel so I can continue providing free weekly content!

This video was not paid for by outside persons or manufacturers.

#blackmagic #pyxis #yourfilmmaker #filmmaker
-----------------------------------------------------------------------
Sharing tips to help you improve your videography skills!

[kevin-eht]

The front USB-C is a 1080p wired output with 2 way OS control (Pyxis monitor only). The SDI/BNC signal out of the back of the camera, to record up to 4K on the VA in ProRes or BRAW. The USB-C on the back of the camera is 6K wired data output for SSD recording, and a wired output for "Cell Phone to Cloud 1080p Proxies" (depends on 'phone) with free app and storage. Over-all, there is also a iPhone and Android Remote "Camera Control" app via Bluetooth - $17 (OS menu only, no visuals). The LAN is the fastest transfer method (no expensive CFexpressB Card Reader needed). Laptop, Browser, Copy and Paste. $5 CAT cable. LAN Cloud and Livestream too.

[drpeks]

I had the same SDI output failure with the studio camera 4kplus G2. Replaced three times and never figured out why the SDI output kept failing. Thought it was a grounding issue but was so done with it and switched to the Broadcast G2 but added surge protector etc.

[YourFilmmaker]

Its the SmallRig universal baseplate. Link is in description

[valarts]

So the info onscreen Blackmagice emailed was incorrect?