Testing the PCV System / Troubleshooting a Bad PCV system / PCV System Check / Test your PCV valve

preview_player
Показать описание
I'm testing the PCV system and will show how to troubleshoot a bad PCV system. This stepwise PCV system check is easy and can help you rule out the PCV system as a cause of a drivability issue or help you with how to know if your PCV valve is bad. I show 2 ways of testing the PCV system. If you have been looking for how to test your PCV valve or system, this video will help. Also, this pcv system test can help show if you have a clogged PCV valve and hose, or if you have a PCV valve stuck open.

Timestamps
0:00 - Intro & overview PCV system
0:34 - Bad PCV system signs
0:46 - 1st PCV system test
2:06 - Interpreting bad test results
2:28 - 2nd PCV system test
3:01 - Clogged PCV valve: Old vs New
3:49 - When you can't use these tests

#pcvvalve #tuneup #diymechanic #diymechanic #diyautoworksng
Рекомендации по теме
Комментарии
Автор

Finally! I've been watching videos for four hours and reading blogs for at least eight hours this video Finally described in detail how to test and check the pcv valve Thank you🙏 thank you thank you huge help appreciate the in depth description and comparison of new amd old valve all the other videos were like shake it if it rattles its fine but I thought it can't be that simple you sir have a new follower thank you so much 👍👍👍👍

spitfire
Автор

hi! The pinch method should make you find out if the PCV valve is stuck closed, but what about stuck open PCV? how to check it?

xxraffoxx
Автор

The lower idle when pinching the hose is supposed to quickly recover when you RELEASE the pinched hose, or WHILE you still have the hose pinched? Thanks.

rgraz
Автор

What are the odds that you you posted the video at the same time I need to diagnose what's going on with my PCV. and why it triggers a P0175 and P0172.
My Fuel consumption has been ridiculous. Started suddenly some weeks back.

marvinogah
Автор

My PCV Valve leaks at the very top where it connects to the hose(only on cold start), i noticed the clamp is loose so it may explain.
I got a brand new PCV valve from the dealer and it still leaks, my main concern is... lets say i buy a new hose clamp and install it so that it properly clams onto the hose, why is there that much oil passing the valve in the first place.


Hehe nevermind, i checked my entire PCV system and then ran a test, turns out the leak is coming from somewhere near the PCV valve

alejandromorazan
Автор

An inexpensive part that can save a lot of trouble.

esotericsolitaire
Автор

Your voice is the same as that of BI PAKATHI❤❤

hazeleyes
Автор

You showed the Honda PCV valve but didn't demonstrate it on the accord. How do I test this on my Honda Accord 2006 v6?

lastofbrothers
Автор

Mate if i open the oil cap i feel small air pressure on my hand but without smoke, its normal right?

DimoS...
Автор

Question, anyone who knows...
I bought a new PCV. I blew into one side horizontally (the way it is installed on my engine) and it had an air leak. Vertically, there was no air leak. I returned it and got another one, but the same issue?
Maybe my lungs are not as strong as an engine! What do I do? Order another one?
On my engine (toyota) it is a difficult R&R.

Equilibrium