SMD Soldering - SOIC SSOP Packages

SMD Soldering - Hand Soldering - SOIC SSOP Packages (SOIC28, SSOP28)

[JMNTLRDRX]

God I hate that "happy" music, but the video is excellent. Such a beautiful job

[thmagistr]

I really love your videos!!! I have learned a lot from them. Keep going.

[EslamsLab]

Impressive work kavo
I learned soldering smt from you
So thank you very much :)

[Gaexiie]

Хорошая работа, все блестит и сверкает. Тоже так люблю

[svily]

Don't do it pin by pin! Just hold a little larger drop of tin/solder on the tip of your iron and just run it sideways ( as you've shown at 2:09 ). Adjust speed as necessary. Put plenty of rosin - okay, flux if you so choose in between the pins of the IC. That's all there is to it, no need to complicate the process.

If the PCB pads are properly sized it's even easier. They are quite long on your boards.

[ElectroIoT]

Really Very Nice .... Many thanks for great hard work we learn lots from you ...

[svenpetersen]

Tin plated PCBs only last 6 months (gold plated 1 year) for factory soldering, so I guess, that is the reason for your cleaning: the PCB is older than that. I have never done that cleaning, but my PCBs were always fresh. BTW: Beautiful solder joints.

[train]

A most exellent video sir .well done.keep up the great work.

[jenniferw]

Thank you for this video. Do you use the same technique for 0.5mm and 0.65mm pitch? Same tip and flux paste?

[naderhumood]

Aptly... Great job....and vedio. 👍🇧🇭..

[andersonoliveirarn]

Androkavo congratulations, beautiful pictures. Could you do SMD desoldering - SOIC SSOP Packages?

[silicomancer]

Very good quality. What exact model of camera did you use? What magnification factor? I think such a camera would do a good job in our workshop.

[Metalhead-life]

What are you sing for magnification, what device and mag.?

[Acky]

There is nothing wrong about soldering each pin individually, but dragging is both quicker and easier and the solder quality tends to the best. Remove excess solder by applying enough flux and reheating. Your solder tip will suck the solder so you can wipe it on the wire brush.

[vutienmanhdtdhdktbcn]

What is the yellow liquid ? Can you tell me please!!

[harunaydem]

Thanks for video. It was very useful for me. What is the camera you use? I also need something like this to see the details on the pcb.

[IsaacOLEG]

hello, artificial brisle are less resistive to heat, seem to me ? or are -there some brush qualities intended for that use ?

[KJJHN]

really nice job. Thank you for the video.

[BUREAUTIQUEPRATIQUE]

Hello, where can we find the measuring cap that we see in your video when you wet your cotton isopropyl alcohol? it seems very practical. Thank you

[samu_ESP]

That liquid, is like alcohol or something?