OLED V6S WITH THE KAMIKAZE METHOD

This video shows you how to install the V6S using the Kamikaze method.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
TIME STAMP

00:00 START
00:06 INTRO
00:17 DISCLAIMER
00:26 PREREQUISITE
00:47 THE SCHEMATIC
01:00 INITIAL CHECKING
01:26 DISASSEMBLING THE CONSOLE
02:37 REMOVING THE CPU COVER
03:21 CUTTING THE CPU FRAME
03:46 THE KAMIKAZE
07:16 TINNING THE DAT0 PAD
07:48 SOLDERING A WIRE TO THE DAT0 POINT
08:51 SOLDERING THE A (CMD) POINT
09:11 SOLDERING THE "D" (CMD) POINT
09:48 SOLDERING THE 3.3V POINT
10:04 SOLDERING THE B (RST) POINT
10:29 SOLDERING THE CPU FPC KIT
11:31 MANAGING THE CPU COVER
12:40 REINSTALLING THE CPU COVER
12:59 STICKING A DOUBLE SIDED TAPE TO THE V6S
13:33 PLACING THE V6S CHIP
13:50 SOLDERING THE WIRES TO THE V6S CHIP
15:15 CHECKING THE DIODE VALUES
15:50 THE TRAINING PROCESS
17:05 MANAGING THE METAL SHIELD
17:20 PUTTING EVERYTHING BACK TOGETHER

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
MUSIC
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
CONTACT & DONATION

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

[writer]

was actually hoping to see a more in depth showcase of this chip from you, great content as always

[techj]

Very clean job and so satisfying to watch. Keep up the good work and thanks for inspiring us to improve.

[publicshared]

You make the kamikaze method look so easy! At some point I'll need to try it.

[araigumakiruno]

i got my v1 patched switch modchipped wth nx instinct v6s and it was very interesting to watch how exactly the dude did my console, good stuff!

[redmimic]

You're a good man and people should tell you that every day

[darielexis]

Tried this method today, everything worked fine, thankyou so much for your video!

[Leeeg]

I'm not getting the Instinct logo. It flashes a few colours, including red a couple times, then starts flashing blue and boots into OFW without showing the logo. It came with the firmware on it, but I re-flashed it (v1.3) and the result is the same. Any advice or places to seek answers?

[AdrianAndreiRobert]

Just did your kamikaze method for the first time. Things are looking good so far. I used as an reper to find the pot, the little dots that are on the PCB instead of really measuring it.

[ltdmod]

Very minor detail but thanks so much for explaining why you don't solder any GND points because of the flex cable!

[froggy]

can you give me clarification as to the bugs that happen when you setup for the usb when i got my switch back it would fail to glitch and would go on the blitz when i connected my charger to it i discovered that it would eventualy stablize but the minute i connected the charger it would fail to glitch please let me know if these are the bugs you were referring to thanks

[bleublurry]

Awesome video and tutorial as always!!

[foxlance]

Definitely not for the faint of heart! Still crossing my fingers for a software base vulnerability!

[hopechannelhopemusic]

Failed to init sd card error.. samsung evo 512gb.. with OFW switch detect the card...

[Meowtional]

what temprature is the hot air at? also is this brand > YIHUA 959D-Digital good for this kind of task?

[TheMeowthTeamV]

thanks for making the 3ds mod tutorial
it was really useful and i got my 2ds modded

[froggy]

awesome video i would love to see a follow up showing how to use the flash and reset via the usb port thanks for your hard work

[Meowtional]

which speed do you use on the grinding pen? speed option 1, 2 or 3?

[Nicoable]

So about this interference when using the FPC cables: How does this manifest on a switch? Blue screen? Hekate exception ? It just doesnt boot? I installed about 6 chips with them, all working fine for weeks. The seventh is a special one: Worked at first, then started to blue screen on boot. Removing the flex, letting it sit for few hours without power brought it back without blue screens. Reinstalled the flex, working again, after a few hours same problem, bluescreen on HOS boot, blackscreen after AMS logo and no boot. Removed the flex again, and it came back. Any idea? I probably just fked up the solder or flex is faulty, isnt it? E: Points were all good, chip was working all the time, eMMC is fine too.

[tayebzizoom]

Thank you for the effort. Provide us with the products you work with

[Meowtional]

had one more question are the solder points the same on the v6 instinct? cause this one is for the v6s and i have the v6