NEW!! Rust-Oleum (5-in-1 Spray Paint Nozzle) Waste Of Money???

In this video I try out the new Rust-Oleum 5-in-1 spray paint nozzle and the results are amazing. I put this can through the test to see how it performs. I show how the nozzle works, what kinda of fan pattern it has and how much fluid it uses in the different modes. Hope you enjoy this video and get some value from it. Make sure to like and subscribe if you like this type of content. Ill link the products below from my amazon affiliate account, I make a small commission off of qualified purchases at no additional cost to you!!
#restoration #c10 #paintandbody #paintathome #acdesignsgarage
#howtopaint

My PO Box Below:
PO Box #782 Troutman NC 28166

Product links Below:

[chadgarber]

2 definitely seemed more powerful than 1?

[colemanprevatt]

Im currently using it for a guitar im refinishing. Specifically the gloss clear enamel. The low output wnd horizontal settings are workint just great. Give the clear enamels on those two settings a try before you give up on em, you might also have good luck with them.

[JamesSmith-hxlp]

Good video! Haven’t seen this product yet. Hope to see how to mix paint with hardener in the future, lot of good information. Thanks

[KiwiStag]

I happened across that multi-nozzle version a couple of weeks ago and because it was the only one my local hardware shop had, I bought it because I wanted a good satin black. Painting a firewall after sanding some surface rust - and a wee bit that looked a touch scaly but actually wasn't hurting the metal underneath - off, I treated the rust and then hit it with the Rustoleum product.

Started with #2 because it says it was "standard", but I got a case of the runs....and figured if my inspection guy didn't like a touch of surface rust (he had told me that they wouldn't pass the car until it was fixed - talk about picky rules in this country) he would probably complain about the paint job too, so I cleaned it off and started again with #3. Much better. I was able to regulate exactly how much went onto the areas I was painting and dust in close to the master cylinder and brake pipes while only getting a few spots on them instead of an actual "coat" like happens with a normal rattle can if the nozzle isn't exactly pointing where you think it is. Getting the paint into a couple of crevasses was easier with #3 too because I could adjust my aim a bit before causing a run on the firewall next to where I wanted the paint to go.

Personally, I thought it was a gimmick that would turn out to be a pain in the rear, but I was quite impressed with the result. I too would use #4 quite a bit on projects, but #3 was great for little stop / start areas and putting a lighter coat on. The proof in the pudding will be when I go to use the can again and the nozzles are all clear, because if not, I wouldn't be recommending it. (Yes, I did wipe them off, but I won't see if the spray pattern is still the same until I use it next and any residual paint will have dried inside the nozzles)

Wish I could help with the blue you are looking for. It looks similar to a British Leyland colour called French Blue, which I am going to have made up for me and put into a spray can so I can touch up my Triumph Stag's paintwork in some areas. One place I know of over here will scan your paint and mix up a can (quart / gallon or spray) of the colour for you. I'm picking if little old New Zealand has them, then you'd have them in the States, so maybe taking the fender for a drive to see a bloke in one of those shops would solve the issue for you. Yeah - it might be a bit more coin to shell out for the service, but as a last resort (as it is for me and my car's 50-year-old colour scheme) it's not a bad solution to get exactly what you want.

Really enjoying your current series on spray bombs and what you can do with the product. All the best!

[barneyclovis]

seem ok hope they release over here in europe and i wish i paid 8 dollars more like 19 here john uk

[stevenc]

How does the atomization on the number 4 setting compare to the Rostoleum Turbo Can?

[SpankysHotRodsandCustoms]

I was wondering if those were any good. Thanks for sharing buddy!

[jefflyons]

Advance auto in Stallings NC can mix a color match and put it in a spray can

[justindry]

I’ve had good luck matching that blue with the dupli color engine enamel. There is a few different shades of blue to choose from. I think the Chrysler blue is real close.

[stuck]

Gonna try these out. I heard the 5 in 1 cap fits on the cheaper non 5 in 1 cans. So you could save money by buying one 5 in 1 can and just reusing the cap.

[Cody-np]

I just bought 36 Cans just bc they were on sale for a little over $2 a can, just watching video to see if there worth a dang

[TalklikeAPirate]

Yes the 5 in 1 caps are interchangeable with other colors not available in the multi cap.

[mrjklee]

$8 with conversion rate for me in cape town. Works out to around the same. Yeah daaam its getting pricey and I'm gana need around 10 cans to give my car a good think coat.

[BrianStorey-jn]

Just bough a can of this for a project im watching you so i don't screw up the multi nozzle thing i'll let you do it for me, , Kidding. . MAYBE 😂

[JoeB]

the spray tip fits on a regular Rust-Oleum can. you can buy just one and reuse it

[ienjoys]

personally have disliked the newer cans since they had the multi angle that allowed you to spray the cans upsides down because now you have to remove the nozzle and soak them to keep them clog free. you use to be able to flip them and spray aerosol out and that would clean the nozzle before storage.

[claytonautomotive]

Rustoleum make a Peaceful Blue and it comes in those 5 top cans too

[fiff]

2 cans of maui blue in this 5 in 1 nozzle style can and both stopped working after 15 seconds

[CHEECHMUN]

After you first use their paints and it sits for a few months, or a year, it seems to lose its compression. I've lost many spray cans and try to buy Krylon instead.

[suiethacks]

I painted my van with Rust-Oleum 5-1. It worked fine until a brand new can druled between the top and selector knob. Ruined the completed hood.