Stacey David's GearZ Quick Tip - Smooth Edges Of Cut Metal

Having the right tool makes all the difference. Stacey shows you the best way to smooth those edges on your metal pipes after you cut it to size so you don't tear your hands up.

[kellymorris]

we have these at work. when they get dull, that's when they slip off of the surface your are deburring, and you'll end up gouging your hand. we've had several people end up going for stitches because of these. granted, they work well when the blade is SHARP, but be warned when they get dull.

[NOLACreative]

Can you use this tool for a flat piece of metal?

[maryuniverse]

Thank you, this is what I was looking, an answer for those sharp edges🥰👏👏👏👏

[ericmann]

Great presentation! Simple, direct and sincere. Excellent

[moradosa]

Does it works on stainless steel sheets?

[TheGreasejunky]

If you use this tool be careful when the safety tip brakes off it will cut deep and fast in your arm hands or whatever you hit when it brakes

[SusanPerreault]

Would this tool work for smoothing out the rough edges of silverware that accidentally went down the garbage disposal?

[James-wdib]

PC case modder here, working with steel panels. Thanks Stacey David

[aliposhtpazan]

God bless you for introducing us this tool very useful

[CoxJoxSox]

Great personality - thanks for you vid

[dodgefan]

When are u gonna put more videos about the SLC im verry interested in that project

[slodown]

Never heard of this tool previously. Many thanks for demonstration!

[lemonsama]

Would this be just as effective for smoothing edges of flat sheets of metal?

[DaveUssell]

Great for flat stock and the I.D. of cylinders. I wish there was an equally easy to use tool for the O.D. Yes, I know I can use a grinder, file, sandpaper or other abrasive device.

[amandafrisius]

How to buff out sharp edges from a 925 silver bracelet, is there such thing as a buff cloth?, it’s scratching my wrist the edges are rough. It doesn’t need to be buffed pretty as no one sees the under gallery of the silver part on my wrist. Thank you!

[SuBNzRaT]

this tool is actualy very handy for other stuff like heads and blocks after resurfacing to get the little metal tabs you sometimes end up with sticking out in the water passages i know its not important or probably even needed to be done but its kinda nice

[ClumsyCars]

Either this is a re-upload, or I seen it on tv.

[grazaT]

That's not exhaust tubing, that's sewage pipes

[Slsnpd]

or a bench stone and a wire brush wheel

[Fucknutsu]

when did gene simmons start doing exhaust work?