Stacey David's GearZ Quick Tip - Drilling Holes In Painted Panels

preview_player
Показать описание
Stacey shows you an easy way to drill holes in painted panels without chipping that nice paint job you have!
  1. Official Stacey David
  2. Stacey David
  3. GearZ
  4. Quick Tip
  5. Drill
  6. Holes
Рекомендации по теме
Stacey David's GearZ 0:01:25

Stacey David's GearZ Quick Tip - Steel Bolts

Stacey David's GearZ 0:01:17

Stacey David's GearZ Quick Tip: Magnetize Any Socket

Stacey David's GearZ 0:04:33

Stacey David's GearZ Quick Tip: Keep Your Car From Getting Stolen

Stacey David's GearZ 0:01:47

Stacey David's GearZ Quick Tip: Hooking Up 2 Batteries

Stacey David's GearZ 0:00:53

Stacey David's GearZ Quick Tip - Wire Grommet and Boot

Stacey David's GearZ 0:00:55

Stacey David's GearZ Quick Tip on how to avoid paint can mess

Stacey David's GearZ 0:01:42

Stacey David's GearZ Quick Tip - Cutting Springs

Stacey David's GearZ 0:01:03

Stacey David's GearZ Quick Tip - How to add taper to new hardware

Stacey David's GearZ 0:01:11

Stacey David's GearZ Quick Tip - Take A Few Extra Minutes & Do Things Right

Stacey David's GearZ 0:01:27

Stacey David's GearZ Quick Tip - How to remove rusty hardware

Stacey David's GearZ 0:01:25

Stacey David's GearZ Quick Tip - how to reach stubborn automotive hardware

Stacey David's GearZ 0:01:19

Stacey David's GearZ Quick Tip: Replacing Transmission Parts

Stacey David's GearZ 0:01:24

Stacey David's GearZ Quick Tip - don't forget to check the trunk!

Stacey David's GearZ 0:01:08

Stacey David's GearZ Quick Tip: Plastic Fasteners

Stacey David's GearZ 0:04:27

Stacey David's GearZ Quick Tip - Pouring Paint From A Can / Exhaust Tips

Stacey David's GearZ 0:01:05

Stacey David's GearZ Quick Tip - Drilling Holes In Painted Panels

Stacey David's GearZ 0:01:34

Stacey David's GearZ Quick Tip: Clean it up!

Stacey David's GearZ 0:01:45

Stacey David's GearZ Quick Tip - Custom Clamping

Stacey David's GearZ 0:00:45

Stacey David's GearZ Quick Tip: Handling Oversize Tires

Stacey David's GearZ 0:00:54

Stacey David's GearZ Quick Tip: Threading Bolts Into Soft Metal

Stacey David's GearZ 0:03:22

Stacey David's GearZ Quick Tip - Metal Shavings Collector/Tool Tech - An extra set of hands

Stacey David's GearZ 0:01:09

Stacey David's GearZ Quick Tip - Make A Depth Gauge For Drilling

Stacey David's GearZ 0:01:45

Stacey David's GearZ Quick Tip - Splitting Rubber Tubing

Stacey David's GearZ 0:01:05

Stacey David's GearZ Quick Tip - Cutting Round Tubing

Комментарии
Автор

Using tape also reduces the chance of scratching the area and gives you something to mark on that doesn't need to be cleaned off later.Step drills also do a beautiful job making nice round holes and leaving almost no burrs.

Oldbmwrrs
Автор

Great Tip Stacy, we will need to use that as we reassemble all the panels on our channel with our father and son twin turbo 65 mustang build.

turbocobra
Автор

never heard this before, definatly sounds like it would work now that I think about.

kenman
Автор

Hey, great idea... I just ran into this problem with my fender on my motorcycle. Should I do it from underneath or on top of the fender?

mikedeuk
Автор

The touch up paint was a good after thought most forget this

ScaleCarModels
Автор

How about nail polish for the touch up?

andrewsegovia
Автор

It is to cover the inside of the hole. Just get something close. What ever you put throught that hole should cover up any diffrence and even if it doesn't, it is far better than dealing with what happens if you don't.

PIONEERaudioLOVER
Автор

Goddamn this is useful and direct, I need to drill holes in my pc case, but hey painted metal is painted metal!

MrSwosh
Автор

Now what happens if the paint chips? What do I do next?

Anthony-kjvl
Автор

I guessed right too, maybe I saw somewhere else

jovenjuarez
Автор

Great tip! I hate drilling on painted panels. Hey everyone come check out my channel and projects! You too Stacey! You Rock!

SYFGARAGE