FX carbon fiber air tank valve leak repair

Showing you how i repaired the air leak in the valve in the bottleneck of my FX carbon fiber airtank

[OHSTN]

Catching up on all your maverick videos. Your effort is greatly appreciated

[astawfik]

When I did mine the hardest part was to remove the valve. Which was Loctited, with black Loctite. I think you should mention this and would be better if you will show how to remove the valve without a purpose-made tool. Apart from these, great video as usual.

[Acutus]

Very cool to see how these things work! Thanks for the demo!

[hotchihuahua]

The PCP world is growing very fast, I know first hand just with volume & Tire pressure in tires with up to 120 psi how deadly they can be and can kill ! we are dealing with bottles in the 4, 500 psi range in the PCP world, it’s no longer handled through scuba shops who know how to test and fill these air containers ! Every time I fill one of my portable tanks I am aware of how dangerous it can be ! It’s so easy to overfill at a higher pressure while transferring from a 4500 psi compressor into a 3000 or 3500 psi PCP tank ! Enjoy the sport but realize what you are dealing with, it’s just like a loaded gun with the safety off !
Nice video and repair tool you made ! 👍

[thakurnileshprakashsingh]

Thank you very much for make it easy for us.

[martdod]

Just the video I’ve been needing. Thank you!

[airshootist]

Wonderful video, helped me a lot! Thanks, Airbuks!

[donaldlemens]

If anyone uses or continue to use the Huma quick fill adapter, you will have this same problem over and over. They now send a restrictor screw to use But it won't work either, it may work once or twice.
Using the Huma blows the valve seat out of its seat, sometimes no damage to oring just reseat but sometimes the same as the video.
When the bottle is screwed on the gun for filling the valve is pushed open allowing easy air transfer in either direction, using the Huma only high pressure air has the force the valve open thus unseating the valve seat.
Bestfittings is working on one that will work simulating as when on the gun.

[shahriar]

Very teachable and helpful video. Thank u so much.

[scottmichael]

Thank you! That's Exactly what I needed!

[archangelsyou]

Great Videos as always... Thanks for sharing !!!

[davidhill]

very useful information ..nice clear video

[abitoutside]

Great video buddy, thanks for the info.

[robertfeddeler]

There's lots of videos showing the rebuild of the valve but none show replacing the Oring that seals it to the rifle.

[berademir]

How to bleed out the air entirely in the tank? Without shooting ofc. Good video btw.

[derivas]

thumbs up like always on each you video to help you!

[chefrenty]

Nice video, wel explained and very helpfull as allways 👍. May I ask, what do you use for lubrication of the o-rings? Will Ballistol do the job or is any silicone oil better? Thanks in advance.

[AntonioLopez-jggd]

Hola soy Antonio español
Me he suscrito a tu canal porque me parece muy interesante
Soy propietario de una impact M3
POR FAVOR LOS SUBTÍTULOS EN ESPAÑOL
GRACIAS

[junardburigsay]

What's the simplest way to bleed the air if the bottle has pressure in it

[franckbecanfayeboue]

Great Video. Is it recommanded to put some loctite on the threads going to the inside of the cf tank, or shall we just snug it up?