TURN ON YOUR HEATING FOR THE FIRST TIME AFTER SUMMER - CHECK LIST - Plumbing Tips

preview_player
Показать описание
This video will guide you through a brief checklist of things you need to do to your heating system when turning it on for the first time that winter. We cover bleeding air from the radiators, making sure the TRV or radiator valve is not stuck and the lockshield is open to making sure the circulating pump is OK and the motorised valves work OK.

***VISIT OUR SPONSORS***
Рекомендации по теме
Комментарии
Автор

Thanks for the advice. I recently moved to a house where I didn't have a clue how to switch on everything 😊

beytiozgur
Автор

My checklist for turning heatiing on after summer:
1. Turn heating on low for short while before it gets too cold for short periods.

ArcanePath
Автор

Good video, yes good idea to check that impeller in heating pump is free. They do seize sometimes after a long summer inactive.

jimgrimes
Автор

Hi Would a dodgy 2 or 3 port valve cause intermittent F22 Dry errors? Likely? System is clean, no air, pump good, water supply 1.0bar ok. Perhaps there is some sludge lurking in the shadows but not my gut instinct as drain was fairly clean. Excellent content, well explained keep up the good wok and work

richardoloot
Автор

thanks, I'll try to remember it for next year ;)

pjodan
Автор

good job i did, my diverter valve seized and the vessel failed.

declanhobson
Автор

If your system has a room stat and it's set and working correctly then surely the whole point of this is to turn your heating on when it gets below your comfortable temperature. That's why they were invented. It won't be running in the summer if the ambient temperature is above the set point so no need to turn it off surely.

argonaut
Автор

Great!! I JUST turned mines on yesterday!! lol

RCIYAH
Автор

Hi
when i turn on heating for just one room heating
all house heatings off but that still working and that shows off
but all heatings in the house getting hot

manjurani
Автор

Hi
We have an old boiler stytem
For the past several years
We have kept the water pump that goes thru the system running
Is this Okay

mariaradatus
Автор

So much hard work!! I have a Grant boiler.. I can maybe do the Water pressure but anything

Hevva
Автор

I've just found your channel this evening and have subscribed - very informative. I have a Glow Worm 30 ci that conked out about a year ago. The hot water works perfectly but there is no central heating. I've replaced all the thermostatic valves and refilled the system with inhibitor added. The system holds 1.0 bar perfectly and fires up normally when you turn the heating on but no hot water flows around the system. A bit cheeky, I know, but any ideas? Just to add, the refill valve on the boiler doesn't work so I have to refill using mains pressure into the drain valve an the furthest end of the system.

GuyRWood
Автор

Boiler not lighting wen I put only the heating on. Works fine with just hot water on. ?.

woodywood
Автор

Another great video!
George is an absolute legend hahaha
also could you do a video on how to use a multimeter for beginners?
#HeldTight

Adeem
Автор

Would you do a review on the ryobi drills I'm thinking of getting the drill and impact driver and just wandering how they are

ashleyrogers
Автор

just turn your heating on in summer its always snowing in summer in the UK

seymurali
Автор

Do you need to switch the mains (orrange) switch on to get hot water from the tank in the airing cupherd to heat tap water?

joblogs
Автор

Surely your mrs has had the heating on before now?!?! Mine even has it on occasions in July and august if it's the slightest bit cool on a night time!

shortyian
Автор

Anybody know why my heating once turned on takes 5 minutes to go to 4 bar pressure, plus also losing pressure gradually over 2 days radiators have no leaks

olliebodman
Автор

hi i have a problem when i use hot water its coming hot and after 1min cold and then again hot and cold whats wrong with boiler plus my boiler switch off and on its not burning constantly .

littlebitofeverything