Why Are Your Radiators Getting Hot When the Heating Is Off?

So your radiators are getting hot when the heating is turned off and you don't know why?

Roger explains in his latest Know Your House whiteboard explainer.

#KnowYourHouse #DIY #SBFAQ

===================================================

Out of respect to our channel sponsors and the wide variety of people who watch our videos, we will remove comments that do not follow common standards of politeness and decency.

[kennethbone]

I had this exact issue in house I bought where the plumbing was converted to a pressurised hot water tank for a loft extension with an extra en-suite bathroom. In summer some of the downstairs radiators got warm from the lockshield ends. Four British Gas engineers tried to fix it over 3 days. They changed the motorised valve twice! They couldn't work it out and left it unfixed. I then got in local independent heating engineer out who diagnosed the problem and fixed it with a non return valve on the hot water return as you described in a mornings work. Great video, spot on.

[michaelblissett]

An excellent teacher, clear and precise and has a way of explaining in detail that is very helpful to many.

[nvaphenix]

I think you may be a wizard! This has been bugging me for ages and this was such a simple and clearly detailed explanation that you’ve made it seem completely obvious.

[descheers]

Another invaluable piece of info, thanks for that. I was just re-watching an old video of yours regarding leaking stop taps and again a priceless titbit of info that's helped me out a few times. These sorts of videos that you and Robin do are a great source of information and are superb because of how short and straightforward they are. Many thanks again 👍

[donaloconnell]

Hello Roger you are a great tutor for me because you speak my kind of uncomplicated language. I think a lot of tradesmen didn't have uncomplicated speakers like you when they were learning so they do their learning at the expense of their customers for many years.

[GrahamF]

Absolutely spot on & exactly what was happening to my system! I tried everything to find out why this was happening, and it wasn't until I got rid of my heat only boiler, and changed to a combi boiler. The connection from the HW return was connected to the radiator return pipe under the floor. This was done when the house was built!
Lazy plumbing indeed.
Thank you 👍

[philtucker]

Thanks Roger, that was a great explanation! (I actually have that minor issue with the rad nearest to the hot water tank) Although you explained the “wrong-way flow” and the one way valve solution very well, I think sometimes it’s the convection of the heat that creeps along the pipes, as opposed to an actual flow, so the one way valve may not necessarily function to prevent that…thank you for sharing 🙏

[adrianodoherty]

A decent explanation of a problem most plumbers/heating engineers have come across. Just moved house and it’s happening in mine too! 😀 Need to get round to draining it down and correcting before too much longer!

[mystikal]

its always a joy to listen to someone who really knows his onions! Brilliant explanation

[silastetley]

Roger job spot on, well explained. The time taken is worth it 👌.

[tonybowe]

Love these SB videos. Amazing knowledge and very clear when explaining how things work. I have this issue so know what to look for now. Thank you.

[leerolfe]

Roger. Been around construction all my life coming from a building/construction family. Decided on plumbing as my profession. If i'd of had you as a mentor I'd of taken half the time to learn the knowledge. Took me a few years to grasp this particular fault find after my apprenticeship! Amazing explanation.

[sleekitwan]

I had this, after I bought a run-down beautiful post-war end terrace in Scotland. It had a turret and spiral staircase, I loved it. Troubles made me sell it after a few years or updating, but the hidden issue was whenever the hot water cylinder was put to use, there was this trend to heat only the lower radiators in the house, not upstairs. I usually believe that once something’s done, I treat it as 100% until I find otherwise, this is one of the three times this has NOT held up! The system had two valves, but once I sketched it out I realised it needed a third. It had been relying on either the house being cold a lot, so some heating downstairs might not be a bad thing (!), or the owners had not noticed, etc.

I fitted the third valve, which stopped the back-channel movement of hot water from the cylinder heating circuit, from going at all into the radiators backwards. It drove me nuts, but the present owner benefits as all of a sudden it’s not just a nuisance but an expensive one. As you will understand, the effect mainly was on radiators BELOW the level of the ‘head’ from the hot water entering and leaving the cylinder, which was perched in a corner cupboard of the kitchen, above the fridge. So, a three-motorised-valve system, instead of two, and it was perfect. Quite weird for me. Take care all.

PS - have a laugh on me…the cost of the house when I bought it in 2003? £35, 000 . 2 bedrooms plus a perfectly serviceable loft bedroom, and in fact this is what scuppered my letting plans - the government introduced a bedroom tax, and suddenly nobody moved because they;d have their benefits and home rooms scrutinised at that point, and this extra room was not ‘legit’. The council man said kindly ‘I am going to forget the request for retrospective approval, and put it in the drawer with the others’. I don;t understand hints, it’s terrible! He meant, I might be asked to return it to how it was, whatever that really means. It can mean, they examine the cables to see what date is stamped on them, but that’s a whole planning and building regs world of pain, let’s not go further.

[CrowdControlK]

I had this in a house in London. Radiators were hot when the boiler was switched off. Eventually I found the pipes going to the tenants house. The landlord had connected his radiators to his tenants house next door.

[imw]

Roger, that might just explain my current problem! I had my combi boiler changed to unvented system and had it relocated in a different part of my house - have some but not all rads getting hot when calling for hot water . Plumber does not now what to do he has changed the 3 way motorised valve so hopefully when I show him your Video it will solve said problem! Thanks I appreciate the time and effort you put into producing these great videos. Ian

[steve]

I'm going to start a campaign, to get you back on LBC radio " helps at hand phone in". Your brilliant and always liked listening to LBC when your radio show was on .
Do you also remember the name of a motoring expert that was on LBC at roughly same time as your show? I think his first name was Gerrard?.

[jonathanconway]

Another terrific video. Thanks. We have only a towel rail heated in the summer via the boiler and all rads are off but still get warm despite TRVs off. Rads upstairs and UFL down. As soon as it gets warm I shut the lock shield valve down and this sorts the problem. A new installation (including a low loss header (no idea what that adds)) but after watching this I'm getting them back in! Cheers

[royster]

Great explanation, have this problem, rads get a little warm when just HW on, installed by a professional as well....!

[paulthomas]

Its only been like that for 8 years! We thought we were going crazy or the controls kept losing connection.
Our underfloor heating warms the tank and our immersion cooks the underfloor heating.
The pipe work looks a little more complex, but I can see the returns are fighting in an equal T.
Thanks

[harveysmith]

Very clear explanation Roger.
I had this problem but with a different outcome so I will share it to help others.
Rads getting hot when the heating was off but hot water on.
Checked the motorised valve, all working correctly, even changed it, still no solution.
Used my laser thermometer to see that the three port valve wasn't sealing. The rubber ball in the valve had just deteriorated and was allow some bypass.
Changed the three port and the problem was solved.