My Bissell Power brush is leaking

Diagnosing the Bissell Ready Clean and other Power Brush models : Water/solution start leaking without pulling the trigger

[ameldock]

My Bissell Powerease is flowing clean water without trigger pull. You confirmed my thinking. I’m about to tear into my machine. Thanks for making this video!!

[alexdeen]

Well explained! Now i found the issue.

[spookiebabe]

Ive had my machine replaced already do to this exact problem with a similar machine from bissel. I only used this replacement twice and its happening again. Im opening it up today, thank you for your video

[cindyhillcoggins]

You are awesome…you just helped me fix mine. Thank you 😊

[terryurban]

I have been doing my own work since my husband had Cancer. I'm greatfull for your help..My machine doesn't spray. I am going to try the trigger.
God bless and Thank you

[tsm]

My Bissell Spotbot Pet is leaking from bottom brush. The brush is spinning but it’s not sucking back into the dirty water reservoir. When the hose accessory is disconnected, it does suck up the water. What do I do? Thank you in advance.

[ameldock]

Well it’s reassembled. No broken parts and no water flowing as it sits with a part full clean tank. Next test will be full use. Stay tuned.

[sandy]

When I pull the trigger only a little bit of water comes out and then it stops. If I shut the machine off and let it sit it will leak out about a cup of water. Is that too different problems and do you know the fix. I appreciate any help you can give me. Thanks for the video

[Realtor]

Thank you!!!
Mine started doing this after just 4 uses ugh

[ashleysnyder]

Ok so I’ve got the Hoover version and it’s leaking looked at everything you did in this video and it’s still leaking from the bottom

[samanthay]

I took the handle off and set the tank on it’s still leaking the clean water and it’s coming out of the bottom of the machine under the white little canister thing.. the spring isn’t stuck I can push it down and it comes right back up. I’m at a loss I’ve takin the whole thing apart I can’t figure it out😩

[TREED]

Hey, brother if you have a moment I know how to fix the material sprayer issue on the Bissell revolution pro heat 2x and its crazy that the problem is simple, I will like to share this issue with you. DO YOU HAVE A DIRECT EMAIL SO THAT I CAN SHAE THIS DIRECT

[Freedom-hnfn]

Thank you my friend, I sent you an email.

[tiredoldman]

The Bissell is junk! The bearing in the brush rusts and then falls apart. Bissell will not replace it. Good luck!

[Watchwomenonthewall]

My Bissell pet powerforce series 2910 got clogged with pet hair. What can I do to unclog it ?