Outboard Motor Tilt Trim Problem. How To Fix A Yamaha F225 Tilt Trim That Does Not Work.

In this video, I show you how to fix a problem with the tilt trim on my Yamaha F225 Outboard not working. It was a pretty easy problem to fix.

---------- Tilt Trim Parts List ----------

---------- Kayak Transport Equipment ----------

---------- Fishing Equipment ----------

---------- Kayak ----------

---------- Camera Equipment ----------

DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

#kayakfishing #kayaking #kayakmotor #kayakmotormount

[colemant]

The BEST detailed YT video on this common problem.... Marinas charge $300 for this same service. Well Done!

[livingthelife]

Just ran across this problem and your video helped me understand what the issue was and the proper way to fix. Thanks for the post great video and easy to follow.

[brian]

If you have that much air, it indicates you have bad seals or pitting on your trim rams. Give them a good once over. Also, when bleeding the air don’t take the screw all the way out you just need to take it to the end let the air out, then screw it back in repeat process about 10 or 15 times, then refill till it blows over

[broderickwhitaker]

You turn the screwdriver clockwise to de-pressurize the power trim. Turning counterclockwise closes the system. That is why you were getting pressure all at once when you removed the plug.

[savepunta]

Great advice bid! I have 115H and was able to use your intel. Not only does that little flathead on set help relief to move up and down but it helped free up to prime motor and bleed off air.

[tyyoung]

Hey Tommy! Great video, thanks. Do you have a video on replacing trim cylinder bushings too ?

[wilsonjr]

Congratulations on the boat When did you get it?

[williampermuy-uk]

I’ve moved my trim up and he got stuck now it doesn’t move. You don’t make it sound only here click click. What could that be? They change the fluid on the seals two weeks ago

[boatinsane]

When this happen the pump dosnt make any sound too? Like no working?

[dtrain]

Awesome information Tommy! Thanks for sharing!

[userethan]

Any advice for if the outboard can tilt all the way up and then 85% down but if it goes past that is wont trim back up?

[andruskomardesic]

I have Yamaha 150 hp. When the engine goes down cracking sound appear and it won't go all the way down... any advice

[ethanchabert]

great video, thanks! but hey, get some safety glasses. :)

[JA-gxhb]

Next do a video on changing the leaking seals. (There's a reason you were low on fluid.)

[denverlatham]

One guy I watched said to leave the screw out when you go up and down to let the air out that way you’re actually working air out of it and you feel it each time you go up and down

[gregbetsyparker]

Great video!! Thanks for simple solution!

[Mgtgrll]

If you trim motor wasnt working, how did your trim it up and down after filling…..?

[userok]

same happened to me to much air and color change ...why ?

[georgenettlesjr]

Mine was loud just like that and I thought it was bad

[LeroyStarrett]

But that doesn't mean you replace the seals on it