Schluter DITRA Installation Tips - #shorts

preview_player
Показать описание
Schluter DITRA installation tips
#shorts #howto #bathroomremodel #homerenovation

0:00 Schluter DITRA installation tips
0:02 How to prime plywood subfloor with Schluter Primer U
0:15 How to install Schluter DITRA
Рекомендации по теме
Комментарии
Автор

I approve of the way ( you have protected Bath and all the tapping up of edges excellent ✅

datheat
Автор

I appreciate how you work. If you start out organized and clean your end result is a good clean job. Lots of pride in your work and it shows.

caruana
Автор

The Hand Support is for real a game changer

Servin_Utah
Автор

I feel like Schluter is taking notes from Simpson Strong-Tie. If you can convince enough people there’s a future disaster/problem, you can sell them expensive solutions for those problems. Especially if you condition your warranty by mandating “proprietary compatibility”.

At some point- you might as well put in an EPDM layer with flanged penetrations and gasketed doors.

jordanthenailer
Автор

Sutra is good, but you still need 2inches of solid subfloor most houses only have inch and a half, that's why we normally use half inch dura rock to gain a stiffer floor so the mortar doesn't crack

KlintonWyont
Автор

What is the use of this membrane ??
My tiles keep poping out after 1 or 2 years . Will this help the tiles stick to floor ??

shaziu
Автор

So if it leaks, you will be able to find it around the edges.

dennislinden
Автор

Should the ditra be i stalled perpendicular to the long dimension of the subfloor?

boycemontez
Автор

How do you join the two sections? I never see that covered - seems like a failure point for leaks!

queenofspadz
Автор

Is the primer really needed? Seems pointless if ditra is waterproof already

XsoloXela
Автор

If it's an extra step like this that may have just gotten added to the lineup. I would use it, going the extra yard as much as you can is better, so I appreciate that.

BonBon
Автор

Floor on apply directly to the sub floor

Floor on apply directly to the sub floor

Floor on apply directly to the sub floor

hucknanjing
Автор

Pretty sure Schluter says to apply the primer to dry surface only. Looks like you wet the floor like one would for the thing set, but that shouldn’t be done for the primer.

prcarey
Автор

I seriously need to ask a question that I know you most likely won’t answer. But did you and your ex partner split up due to the fact that he can’t keep anything clean. Whenever he works it looks like a thinset bomb went off everywhere. He must use an extra bag or two of thinset each job due to the mess.

caruana
Автор

I never understood the "dampen with a sponge" when it comes to subfloor or any of the cement boards. I understand why it must be done, it's the method that I find to be quite ineffective. I ditch the sponge method and put water in a spray bottle and mist it instead. Way more consistent and faster than using a sponge.

matthewsmith
Автор

Toilet flange must be installed over and after the finished floor. Lots of people missing that

romandewys
Автор

How many years we got away not using primer now all of sudden we need it. $50 bag of cement if it can’t do it than i am moving to other products

justanotherchannel
Автор

I have not seen anyone use the Ditra Primer.

scottkeefer
Автор

You must have to an awful big trailer to all your job site with all the trick tools that you advertise.

PatHaskell
Автор

You sound like napoleon dynamite trying to not sound like napoleon dynamite

FDDLERSGREEN