How to Clear a Fault on a PLC

This video is about how to find and clear a fault on a micrologixPLC. I feature the Micrologix 1400 which is controlled by RSLogix 500.
Here is the link to the video about how to create the network for PLC .
@KletteTech

[rafaelgomez]

He is clear when he speaks and ready to rock and roll, I watched other videos and I can hardly understand what are they talking about.

[KMETALS]

i love how he say's that he's ready to rock and roll :)

[NESSE]

Taking a PLC class and really need to learn how to troubleshoot these controllers. Your videos rock! 🤘

[rajendrarahate]

Very good explanation and easy to understand.

[sujithks]

Hi sir micrologix 1200 shown fault indication... how to solved this problem...
Thank you

[anilpatnaik]

Thanks for your valuable information, I was facing same issue in last 3 months. I have seen this video and solved the issue. thankyou so much sir. 🙏

[ankush]

my plc is only shown power led and input leds and not working
what to do?

[paulalexandertoaquiza]

Hello
I have this fault on a plc micrologix 1400 : Major error s:6 = 2Bh.
Me and 3 other colleagues have spent hours and hours trying to fix it and nothing works.
The fault indicator flashes red.
Every time we upload a program to the plc and we want to go to run mode it goes into fault. We have loaded a basic program and nothing works.

[navdeepsatia]

Hello Klettetech
I was trying to make a simple circuit on Rs Logic Micro that contain Three Inputs and One output. First input that will jog the machine second input will start the machine and will latch it and third input is for stop the machine.

In first rung I put input Jog with Normally open contact and output.
In second Rung I put input start with Normally open contact. And stop input with Normally close contact. And same output as first rung with same address.
Now if I toggle bit of Jog it would not work however it is working in second rung as it should be.
I also used the bits now it will jog but will not start the output in second rung. Can you please help me to solve this Problem.
Thanks.

[denzoavenue]

Sir how to fix B&R X2X network fault

[dwarkeshpatil]

Specially help in night shift 😅👍👍👍 so true

[dinomra]

Are you communicating with the PLC through ethernet?

[et.sachin]

Can there be any other type of faults in PLC?

[carlmarquardt]

Did u have to plug a cable into it to connect to it