What is Safety Relay PILZ ? Easy Explained | pnoz X2 X3 X4

#safetyrelay #relay #safety #PILZ #pnoz
how to wire a safety relay
pilz pnoz X2 X3 X4

Siemens TIA PORTAL Tutorials for Beginners

Learn Electrical and Electronics

SIMATIC MANAGER TRAINING VIDEOS

00:00 what is safety relay ?
00:14 working of safety relay
02:16 wiring of safety relay
03:00 example demonstration of the safety relay

[pnswg]

In the schematic section, the wires goes to the wrong pins but the audio is true. Possibly because the software wouldn't allow you to draw the lines to the correct pins. Good explanation anyway.

[octymocty]

thats made me look 100% right in an disgruntled converstaion over pilz
verry clear and easy to under stand for the aprentice

only thing i would say is use orange cable for controll identification as yellow is a no no
thank you

[Jatin____Sharma]

Awesome, today I learn about a new device😍

[marijngade]

Would this setup not require 2 master relays in series to consider it full safe? This way the relay could get stuck open and the intire safety part is useless.

[judeclark]

thank you so much i finally understand safty relays

[shadowmanxyz]

Very good video. Ty for taking the time out to make this.

Liked & subbed

[syedhassanali]

Thank you very much sir very informative video

[kevin]

Thank you Sir for spreading your knowldge

[irwinjimenez]

Great job. Very useful video. Thank you.

[AEGroupNL]

You can put 100K in the thumbnail :) thanks for the video!

[kencooley]

I have a question. If one of the channels are not closed when the on pulse to the start channel is made, do you have to turn off both channels to attempt to start it again?
So if channel 1 is false and channel 2 is true. Start signal is received. Must channel 2 be made false before another start signal can be made true?

[showshockak]

How could one even attempt to give this simple tutorial thumbs down?

[TheThippu]

Excellent i have learned new thing today,
Is it same as Siemens Sirius safety relay with more chancels

[shanefrank]

Great video! I have been having trouble understanding safety relays from the data sheets and this helps. But I was wondering if you had only wired the contactor to only 13-14 (and not series 13-14 and 23-24) would only the red button connected to S11-S12 turn off the contactor? So S11-S12 safety input only controls 13-14 and S21-S22 only controls 23-24. Is that correct?

[danghoangvinh]

Perfect. but i have a question. Why do you have to wiring both 2 NO 13-14 and 23-24 to contactor instead of only 1 (13-14 or 23-24 to Contactor) .Thanks you about this video!

[arunrajendran]

Super explanation... Explain pilz X3 relay also?

[azharbarmare]

Sir I had a question in my case relay is starting but after some time but it is continuously asking to reset and sometime reset button also dnt work...

[Jarito]

Great video, thanks. Keep on the hard work

[johnrece]

So this relay doesn't have a reset option? So you will have to turn off channel 1 and 2 to restart it?