DIY Door Know How Adjusting Door Hinges?/Door Edge Gap Too Close...Part 1

DIY door know how adjusting door hinges/door edge gap too close...Part 1 is what this DIY howto video is about. VideoJoe is looking at a door where the door edge looks to be too close to the door jamb when closing. There is barely any gap & anytime it appears that the door could start rubbing on the door jamb & he doesn't want that as this door is scheduled to be painted so now is the time to make a door fix to this particular door by adjusting the existing door hinges to create more door gap when closing. Can you really make more of a door gap just by adjusting the door hinges? Most times...yes. Watch & learn as VideoJoeShows you what VideoJoeKnows...DIY door know how adjusting door hinges...?/Door edge gap too close...Part 1. Yes!

[amyandwade]

That video was outstanding. Thank you for teaching the way you explained things

[askSergeyBelov]

You’re legend. Just fixed my bathroom door this way. Thank you! 🙏

[roselps]

Nothing like learning everything but how to fix the door!

[llwk]

So by putting the two extra screws in at each hinge that pushed the hinges outward a little bit?

[wisdomsquare]

Those screws that won't tighten can easily be fixed! Let me give you an easy quick fix!

Take you some wood tooth picks and put them in screw hole of screw that won't tighten up! Gently tap them in with hammer. Break off ends that stick out. Now run your screws in.

They tighten up just fine! This is a quick easy fix!

[joekind]

Did you mention the purpose of what you want to accomplish? What you did was to drive the jamb closer to the stud/right?

[PD]

A zip tie the lenght of the hinge works the same.

[sethw]

I just fixed some screws that didn't tighten with just putting some toothpicks in the hole and snapping them off and putting the screws back in👍

[sikatubo]

How to fix door hinge or how to use tools???

[herbertsmith]

Not to be nasty but brother cutout all the talking about ur tools and everything g else. Just show how to do the job. It's frustrating having to listen to all that before learning

[neiljones]

A load of crap. To move a door just bend the pin barrel on the door plate by a millimetre. If the hinge screws start to spin the wood has stripped. Put a match in the hole and snap it off flush and then put the screw back in by hand, not a screw gun. This video is so complicated. 😮

[tonymolina]

14 minute video wow, this could have been explained and done in 5 or less.

[MrEdvincanagasabai]

You spend too much time talking on irrelevant issues rather than do the job on hand!