2002 2006 toyota camry 2.4 how to unlock the cam shaft timing gears toyota vehicles

how to unlock and lock and install cam shaft timing gears on toyota vehicles in this case 2002 2006 toyota camry 2.4

[Cruzeyn]

The best video on this out there thank you

[ibcrypto]

What I love about your videos. Its very obvious you leaned from doing alot of these and show in a very practical way! One thing I was wondering. I have this engine with the stripped out head bolts in rear. I wanted to try to use a longer head bolt with slightly bigger threads. I know this is a short cut but not interested in putting more time/money in my 200K Camry. Is there a way to move the rear cam out of the way so you can replace one or more head bolts on the rear side of the top of the head? Thank You!

[kblazn]

I’m currently changing out the timing chain on my daughter’s 08 Camry with a 2.4 and I’m kinda curious what would happen if you tried installing the vvt cam gear in the locked position? Even though I do have a new one on the way, after watching this video I decided to go and try installing the old one that I removed in the locked position thinking it might not go in but it slid right in 🤷🏽‍♂️

[JuanDiaz-vmpv]

Excelente. Muchas gracias por su tiempo. Buen video!

[daisyirimagha]

Hello wonderful video. I changed my intake gear on my 2009 corolla and i guess it was in the locked position now I'm getting a p0012 code pls how do i correct it.

[anthonyvasquez]

Do you have a video of this procedure on a 2ARFE engine? The 2.5 that went into the Scion tC and Camry.

[lewisdipo]

Hi i have a Toyota camry 2003 has a code P0012 Description: Camshaft Position 'A' - Timing Over-Retarded (Bank 1), i have replaced the camshaft sensor bought a new one still given same error code, please any advise. Thanks

[ronanjuries]

Question with a cylinder head job

Must you unlock then lock.

Or do you have to put chain on in willl unlock position?

[Nayeful]

Hi I have a 2007 Toyota camry 2.4 has p0335 code car crank no start replace the crankshaft sensor with oem denso sensor still crank no start I plugged ob2 scanner when cranking the engine has rpm signal what should be the problem I’m lost is the timing jumped? Need advice please thanks in advance

[kweeyoongchee]

I have toyota Estima year 2012 model ACR50, after replacing head gasket and piston ring all The colour timing mark are correct, but after 3km of driving, i am having a code of p0012(intake cam over retarded)pls help?

[iliqntraikov]

hello if it is mounted directly locked is it a problem? Toyota Prius 2 1.5