U-POL RAPTOR Bedliner and Protective Coating - Black with Kevin Tetz

RAPTOR is available in Black, White, and Tintable in National Rule, 2.6 VOC Compliant and 1.7 VOC Compliant formulas. You can find RAPTOR in 1L kits, 4L kits, 2L Roll-On kits, 5L tins and pails, and 200L (55 US GAL) drums.

U-POL RAPTOR Tough and Tintable Protective Coating is a durable urethane coating that provides surfaces with a protective barrier that can withstand the toughest situations.

Developed to tolerate most climatic conditions, RAPTOR is UV resistant and won’t fade or “chalk” even after years in the sun. RAPTOR is also waterproof and protects surfaces from rust making it perfect for substrates that will be submerged in water, including salt water.

RAPTOR’s versatility makes it perfect for almost any application. Spray or roll RAPTOR on high traffic areas; it’s scratch and stain resistant and easy to clean, simply hose it off. Its flexible formulation can handle impacts without cracking, making it perfect for its most popular application as a truck bedliner.

RAPTOR is unlike other bedliners or protective coatings. 2-component urethane technology far surpasses the durability of epoxy and 1-component coatings. And in case it does scratch (which is tough to do!), RAPTOR can easily be repaired. You can’t do that with most of the other bedliners and protective coatings!

RAPTOR protects industrial surfaces in the harshest environments as well as the smaller surfaces we rely on every day. It’s durable, tintable, looks great and lasts a long time. When you need a surface protection solution that can stand up to the elements, choose RAPTOR!

[jeffparryncc]

Just did my 1999 Subaru Forester. Works great, looks great. 2 Bottles did 1 coat, I used all 4 bottles. 8/2020.

[jamesellis]

Just installed this product in my truck bed ( 8' bed). First let me say that this is a good product so far. Next let me say that the 4 bottle kit will not cover the entire bed without leaving light spots. I recommend buy at least one more bottle to do a through coverage job. So far it seems to be a really good product and time will tell if it lasts...

[sadsciuidae]

just finished outside of truck short one quart after two coats ... what is the best way to prep for finish coat SUN 23 APR 2023 ... yes just now

[Kgoutdoor]

Does it come with the spray gun? I have an air compressor. Trying to do a trailer. Do I need to sand a brand new trailer when applying raptor liner?

[Duramax_LSX_DenaliLP]

Thinking doing the bed of my Silverado and strongly considering shooting raptor on the half top of my 86 K5 Blazer

[Kgoutdoor]

Can I roll this onto wood decking on a trailer?

[toddwalton]

I am looking at using this for my front bumper. If this coating gets damaged on the bumper, can the area that was damaged be touched up (recoated in that area)

[mattsvintageshop]

Hi, can you use 3m accsuspray hvlp paint gun that only can be adjusted to a maximum 20 psi and use 20 percent reducer and get same bed liner finish just like when kevin applied the raptor 20 percent reduced bed liner with 1.8 hvlp paint gun ?

[michealoconnor]

Can I use raptor epoxy primer over a wurth rust converter ?

[grossmeister]

Does this produce a lot of dust and overspray? Do I need to cover stuff that is like 5m away? I would be using the "Schutz"-gun. Thanks!

[allbrant]

I just washed my truck for the first time post Raptor liner. I got lint on the truck. How do I remove the lint?

[simoneatzeni]

Ciao . Posso chiederti consigli su come utilizzare la vernice raptor? Solo che io non so scrivere nella tua lingua, cmq se si può cerco di organizzarmi per poter comunicare grazie

[nosoyono]

I’m looking for bed liner that I can buy in a different color besides black? What I want to do is roller paint the bottom of my aluminum boat I’d like to find a bed liner paint in silver or aluminum color.

[anthonycurcio]

I want to coat the floor on the inside of my trailer. What do I need to do to prep the wood for the Raptor application?
I've seen a video where polyurethane was applied prior to Raptor install to seal wood and provide a bonding surface. Is this what needs to be done or can you just 80 grit sand bare wood and apply Raptor?
Any Advice would be appreciated

[iandalton]

I definitely would not use Raptor . I had a steel tray on a 79 series and after 3 Years the product has shrunk and cracked. Now the water has entered the cracks and now the tray is rusting. Upol does not want to know about it and even refused to inspect it. I went Raptor because i was told it was the best product for the application. How wrong they were. Now I have to remove the tray and get it sandblasted and powercoated.

[iOoziE]

Hi. I was wondering, I only have a front and rear bumper to spray. Dry time before second coat is one hour. Would the mix in the bottle that I will be using to spray the first coat dry up before I can do the second?

[mattlee]

Hey Kevin can you please give me some more information on the HVLP gun, just starting out and want to get the correct sized nozzle etc.. Love the finish you achieve through the hvlp gun, just want to try and replicate it. cheers i live in New Zealand and would also like to know more about the window decal please.

[leejohnstone]

Iam doing a camo paint in raptor paint can I use green colour on top of the black

[mattsvintageshop]

what is the correct U-pol reducer to use in the raptor bed liner?

[evilone]

This stuff is amazing!! I bought another kit