Snow Blower Carburetor Removal Fast and Easy! Under 10 mins! 👍 ❄️

Watch how to remove carburetor for the Troy-Bilt 2410 Storm Snow Blower in less than 10 minutes! The video is broken into 17 Step-by-Step instructions so it's easier to follow!

🎬 Other Snow Blower Related Videos:

📅 Video Release Schedule: Weekly
------------------------------
ℹ️ PRODUCTS REFERENCED IN VIDEO
Note: These links may be affiliate links and any purchases through these links will earn me a small commission at no additional cost to you. I appreciate your support and it's greatly appreciated. This will allow me to release more videos!

------------------------------
🕑 Time Marker
0:00 - Introduction
0:28 - What You'll Need
0:52 - Focus Area
0:55 - Getting Started
0:59 - Step 1: Remove the four 10mm Bolts from the cover
2:27 - Step 2: Center the Throttle so it aligns with the gap
2:34 - Step 3: Remove the key
2:38 - Step 4: Pop Off the Choke knob
2:47 - Step 5: Remove the case
3:28 - Step 6: Disconnect the Primer tube
4:07 - Step 7: Remove the two screws from the internal case
4:33 - Step 8: Remove another case
4:52 - Step 9: Apply the Vice Grips to the Gas line to prevent leakage
5:39 - Step 10: Loosen the clamp to be able to dis-engage the gas line
6:05 - Step 11: Push the gas line out with a Flat head screwdriver
6:35 - Step 12: Remove the two bolts (10 mm) from the case
7:14 - Step 13: Gently pull off the case
7:59 - Step 14: Carefully remove the gasket
8:31 - Step 15: Carefully disconnect the thin wire
8:52 - Step 16: Carefully disconnect the thin metal bar
9:07 - Step 17: Slide out the Carburetor


OTHER RELATED VIDEOS/PLAYLIST:
🎬 Home Outdoor Product Reviews and DIY Videos👍🏠

#troybilt #snowblower #carburetor #diy

[deniscouillard]

I have the same model of snowblower from Canadian Tire from 2021. Your video is very well explained and I cleaned the carburetor last night and replaced the gasoline with new one. I am from Quebec, Canada. Thank you very much for these explanations. My snowblower now works as it did originally. I had first added a gasoline preservative last year and that is what clogged my carburetor. In previous years, it always started well without additive...😁😁😁

[ddmadcity]

I followed your awesome videos for removing my Troy Bilt snowblower carb and the accompanying video for cleaning the carb and it worked PERFECTLY!!!! Super comprehensive and saved me a sh!t ton of money having to have someone come pick up and overcharge me for what was a very easy fix! Thank you so much for the great tutorial videos- YOU ARE THE BEST!!!!

[luzinspired]

I have to say, my snow blower had not been turned on in over 2yrs. Of course when I was trying it would not go on. I went on you tube to see how to clean up carburetor, sure enough. Did everything as you did and put it all back together and started right up like a charm. And we are expecting 2 feet of snow this weekend so I had to get it started. Thank you for your channel.

[fredgarvinsmagicalworldofs]

I watched a few videos for this repair before coming across this one and this one is the best! Easy to follow steps that made me feel comfortable in attempting this job myself. I watched this video and the follow up on how to clean the carburetor. 45 minutes later my snowblower started right up! Can't thank you enough!!!

[robertleonardi]

As someone who isn't mechanically inclined, this video was easy to follow and I was successful in removing the carburetor. I highly recommend it!

[herbertmiranda]

This video saved me Not all about the money, When in doubt search it on YOUTUBE. Your step by step was immense! All last winter couldn’t get it started for the first fall! I was Decided on this fall to do it myself with some guidance, and i would say thank you!!! After watching both video’s, Started RIGHT UP!!! Keep it going!!!! For the noobs like myself.

[stevenroyer]

This is a very well filmed video. Great job. Thank you.

[ralphierodriguez]

Wow amazing thanks I couldn't do it without your help I couldn't even sleep knowing there is a snow storm coming and my troy down you saved me follow his videos he goes step by step 😀👍👊

[melissasteffen]

Thank you for this wonderful tutorial! It was so easy for my husband and I to fix our snowblower using this!

[anthonybozzanca]

This was a very helpful video! The only suggestion I'd give is to loosen that bottom nut on the carburetor before taking it off. Mine was on so tight that I had to slide it back on the screws to hold it in place to get that nut to turn (which was no big deal). Great guide!

[RileyJohnson-brwh]

Very helpful video. Thank you for the help. This helped me out so much.

[onehmong]

You have to do the installation too. I just did everything

[Jeff-vjjp]

I have the same snow blower. Followed your instructions to remove carburetor, clean, and reinstall which was easy. Added fresh oil and gas. Plugged in to start and it took a couple cranks and started right up. I let it run for two minutes and stopped it. I tried to start again, but no go. Just cranking. You think it could be the spark plug?

[walterspringer]

Well done. But, isn't it easier to siphon the tank and run the machine dry at the end of the season? Also always use ethanol free gas.

[MisterPotski]

My snowblower ran out of gas, on the next start up after refueling it ran insanely fast and would of likely blown the motor. Could a carb cleaning potentially fix said issue?

[gaellajeunesse]

Hey, my carburetor is like stock and don’t want to move what should I do??? I put some WD40 and it’s still don’t want to move.

[AROCAI]

how do you remove the choke control lever? The plastic that attached to the knob broke and now I need to replace the whole rod. How do I do that without replacing the entire carb?

[tommyleonardo]

So I clean it out and it starred, but now leaking gas so I changed the rubber o ring that is supposed to seal the bowl. It still leaks, can a bad gasket cause that or is the carburetor junk?

[debalenalang]

Mine starts but when remove from choke the engine dies. is this still carburetor issue? I tried to clean with seafoam but no go.

[jiminchoi]

When I tried to pop off the choke knob, the whole thing (the knob is still attached) popped off. Did I possibly break anything...? it does not go back in anymore.. I have to open everything tomorrow to see