👍 Ortur YRR Rotary Setup - The Only COMPLETE guide!

preview_player
Показать описание
➡️ Click on Show More↙️for other Links!

➡️ Here is a direct link to the printable YRR guide:
ℹ️ _Sorry, but this pdf has been lost. The video has all the info._

*The LaserMATIC 10, 20 & 30W: King of the Diode Lasers!*
The LaserMATIC 10, 20 & 30 are now IN STOCK!

The Roly Automation Facebook Group:

=======================================
Follow me on Instagram for behind-the-scenes pics and videos!

Shop my Amazon Store for focused laser products!
Remember! _Anything you buy on Amazon_ after following this link *supports the channel* and doesn't cost you a penny more!

=======================================
🏆Become a Patreon Supporter for insider benefits and downloads!🏆
*Patreon supporters get 80-100% OFF in my graphics store!*

If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
=======================================

=======================================

➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99

➡️ 4 Physical bed Material Standoffs - $17.99
_(ALWAYS LIMITED STOCK)_

➡️ 3D Print Honeycomb bed air gap Standoff STL File

➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
_(Other Sizes Available)_

I want to give a BIG SHOUT OUT to all my viewers who are supporting me in this effort! Thank you SO MUCH for your support!
=======================================

Need to mail me something?
The Louisiana Hobby Guy
4945 Grand Terre Drive
Marrero, LA 70072-6613

Lightburn Software - Try Before You Buy!

Lightburn printable shortcuts guide:

=======================================
Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
=======================================
➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95

➡️ Ocooch Hardwoods:

🆕 The NEW ORTUR CHUCK ROLLER! No Assembly Required! $179.99!

Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:

The CORRECT glasses for my diode laser!

CHEAP and effective transfer/mask tape

Stainless scissor platform for height adjustment of my bed
Several sizes to choose from

Steel bed for my other laser:
"Punk Spikes" for the steel bed:

LED light bases - 2-pack - CHEAP and nice!

Pre-cut Acrylic for LED light bases

10-pack of Acrylic, 5x7 clear
Several sizes to choose from

60 Pack of thin wood rounds

Slate coasters with a stand

#LaserMATIC #Roly Lasermatic10 #ortur #orturlasermaster2 #lightburn #tutorial #Atomstack #Aufero
Рекомендации по теме
Комментарии
Автор

Dude! I can't imagine how much time this video saved me in getting my rotary setup, but I'm sure you've taught me in 30 minutes what would've taken me a week or two to figure it all out on my own. I offer you my heart felt THANK YOU! I'm also a happy new subscriber!

martymitchell
Автор

Thank you so much for your clear explanation. Most online sources give the impression that the YRR machine is "plug & play" which it most definitely is not. I was getting a whole lot of weird error messages, the "test" function was working but not framing or burning; and your simple guide through the settings menu solved the issues.

robelwood
Автор

Great video. No unnecessary comments. Facts. The time saving for setup is 90%. Greetings from Austria. Near Vienna. Mozart etc.

reinhardwallner
Автор

It's a shame other youtubers couldn't explain these steps like you do.

Easy to understand and covers all steps.

stepheniley
Автор

I just used my YRR Rotary attachment for the first time on my Aufero Laser 1 and there is NO WAY I would have made it through it as seamlessly as I did without this video!!! In fact, I have no idea how I would have ever figured all of this out on my own or from other videos! Thank you so much for sharing your knowledge.

MakingwithMarilyn
Автор

Thanks for this guide to setup the Aufero rotary to my Aufero LU2-4-LF, I know that this is an old tutorial but the info was spot on. I plugged the rotary into the y1 plug and figured out that my y2 connection had to be unplugged also in order for the rotary to work properly. I just wanted to thank you.

LJOLIVIOOlivio
Автор

After working with Lightburn they found a glitch in the ortur software. After I got that straight. Your video got me got me going and a big time saver. thanks Skip

skipburton
Автор

Rich, again you are a godsend to all of us laser users, especially Ortur/Lightburn users. A huge thankyou to you for not only your time experimenting, but putting the videos together and sharing this information to the community.😀

IIIofV
Автор

if your completly new to this stuff, what I did to learn and test before I used tumblers, was paper towel cardboard rolls, and toilet paper rolls, after there empty, def good for learning on. this is a great tutorial tho!! ty!

joea
Автор

Thank you so much, Sir, since May 2021 I bought my rotary and does not work out for me and I threw it into my store until today I said let's do some research and try to do something, must be some help on youtube come now I found you thank you again Sir

NaliBroadcast
Автор

😀 thank you rich had this setting in a box for months now, got it up and running burned my first tumbler today. and had fun following along.

dannyholzhauser
Автор

Massive thank you for putting this together! I struggled getting my rotary going and the few machine settings were what I was missing. Thank you, thank you!

thewoodenmustache
Автор

Excellent video. I recently purchased an Ortur engraver and I’m very disappointed in the assembly videos put out by Ortur. This helps a lot. Thanks 👍

gregj
Автор

You Have A Great Way Of Teaching / Thank You

VinnieBonti
Автор

Man, thank you so much putting the effort into explaining this aspect of getting a rotary up and running in Lightburn. I had someone want to order engraving on tumblers and had just got my rotary. I was worried I wouldn't be able to figure out in time to do the job. Thanks to you I was doing a good quality engraving on the first day! I don't know how long it would've taken me to figure all this out on my own but this was a lifesaver!

rednef
Автор

Excellent Rich. There was no way i could mine working without your instructions. Awesome!!!

thetruth
Автор

great video for rotary. It worked great for me the first time I tried it. Went back to standard with out issues. Today I thought I would get a little creative with a tapered bottom wine bottle. So I made my funky set up. I can provide pics if you want them. But I had issues with the unit itself. I changed my settings to disable homing at start up, then turned off the power and attached the rotary cable. Next I powered up the laser. Then I loaded the rotary file I saved from my first go at the rotary set up that i did via your video. Then I selected write into the machine settings and created my burn file graphics. Then it went crazy. I kept getting the Gcode error while trying to home or jog. I had home turned off. Anyway, I had to go back to the standard settings which was a little difficult because of the gcode error. after research on inet, i found a comment about an error in the $22 code. fixed that and i was back to good to go on the standard settings. Then I thought I would try one last time. Instead of using my saved rotary machine settings I started from scratch with your video. It worked great. I know this is a long comment but my question is, d0 you have issues when you go back and forth between the two machine setting files?

barrysuydam
Автор

Awesome tutorial, Thanks....! I built my own 3D printed roller and the first successful engraving I did was after seeing your video!

archangr
Автор

I really like what you are doing here. I watch all your videos and get great ideas for them. Thank you. I was having trouble with the rotary as everything printed in mirror. I tried the mirror button both ways nothing changed. Tried switching red and black wires nothing . switched blue and green wires still nothing. After moving everything back to original I switched the blue and green and the red and black wires. when I changed all 4 the printing came out as needed. Thanks again for putting out these great tips

richk
Автор

This video is so simply explained. I wished I had watched it before I installed my YRR. he video I watched didn't say anything about savings settings and now I am experiencing error messages and having to wait for technical support from Lightburn

kimdeveaux