Installation and Use of Ortur Y-axis Rotary Chuck

· Multi-mode Y-axis Rotary Chuck.
· The elevation angle can be adjusted 180°, the rotation is 360° without disassembly.
· Can be used to rings, cups with handles or irregular items, etc.
· Engraving accuracy 0.45°, engraving diameter range up to 120mm.
· Aluminum alloy material, one-piece structure.
· Easy to install, sturdy and reliable.

Purchase link:

Join us to earn commissions:

[MVagner]

Have a nice day. i want to ask would this rotary roller also fit my Swiitol e24 pro?

[ramaroodle]

I have your rotary chuck and love it. Wondering if it's possible to hook it up to the x-axis instead of the axis so it aligns with the left to right layout of my NEJE Master 2.

[HexapawsOfficial]

I have the Ortur Master 3 and Ortur Master 2 connected to Ortur chuck rotary. How do I navigate both lasers without disrupting settings in Lightburn?

[StravidesUk]

What is the correct mm per rotation setting - or how do you find this out ?

[geoestudio]

Hello, Is it compatible with ACMER P1 pro ? The description of the motor is 42SHDC4012Z-32WB

[Thomas-hmtw]

Is it compatible with atom stack s20 pro?

[ivansilver]

thankyou so much, , , it kept leaving lines so i copied your settings, , , brilliant

[Gabmx]

Hello
How can I make the design align correctly to the center?

I have everything correct according to your instructions and the measurements when recording the design come out well, the only problem I have is if I want to center the design
For example: I have a 5 cm rectangle and when I center the laser on the design it is not the 2.5 cm it should be, it goes too long.

I would appreciate your help ortur team, thank you

[darciecarpenter]

When i add the 1mm to the X & Y pos it positions my image to just outside the top left corner, instead of the inside of the lower left corner like in the video. What am I doing wrong

[sergio-r-gbrexy-r-g]

Buenas, sabeis si el eje de rotación es compatible con Máquina de corte y grabado láser CO2 Flux Beambox

[xmikexcorex]

i have the Ortur Master 2 the normal one not the pro, is this axis compatible with it?

[Yngvaronlyforgame]

Hola como puedo hacer para que mis trabajos no me salgan con rayas, es que mi rotatorio no hace bien fluido los trabajos y siempre me sale con rayas raras

[jspartan-tv]

i use the LM2 Pro S2. Are the settings in lightburn the same?

[miguelberroa]

Hello, is this rotary compatible with LM2?

[hawknot]

Es compatible con la cortadora láser de Unit Electronics CO2-4040?

[ads]

Dears, a have to TTS 2 pro 20 W, this is compatible us?
Thank´s so much!

[Thomas-hmtw]

Es compatible con atom stack s20 pro??

[jimjh]

I have done the $22=0 and I still get an error 9 I have the LM2 Pro. I have had my chuck device for months and havent really got it working properly. I had t working once last nite but could not get it to work everything was backwards (even though I turned on mirror in the rotary setup section

[compdad]

I have a Ortur Y-axis V 1.0 Rotary Chuck and a TwoTrees TS2 and command $141 is invalid. 120mm per rotation is no good and nether is 96. Testing and playing it appears that 117mm per rotation suits my configuration.

[steveparry]

I'm trying to figure out if the Ortur Y-axis Rotary Chuck will work with my NEJE 3 max v2. Can anyone help me out?