Spektrum Quick Hit Tech Tip - How to disable AVC

In this video, Tom explains to our fellow RC Enthusiasts how to disable AVC on the latest version of AVC Stabilized Receivers.

This applies to the SR6100AT, SR6200A and SR6110AT via the bind button. If you need assistance with older "legacy" receivers please refer to their respective manuals.

Also we encourage you, the RC community, to give us suggestions on more quick hit tech tip videos! What do you need help with or what have you found fixed what you think could be a common mistake? Let us know!

Thanks for watching!

Make sure to follow us on Facebook and Instagram for all Spektrum News and Promotions!
@SpektrumRC

[ParcoUpchurch]

Thank you! It would be nice if you all would put all this info in a doc on your website or videos like this on your Horizon site to better help and assist newbie customers.

[mike-ycbi]

I would love more videos on the spektrum smart technology for firma an surface recievers... I have so many questions an theirs no place to go for the info... please help!!!

[loose_nuts_are_faster]

OK! Now I may be able to master my SR6200A.

Note to Horizon Hobby: The instructions provided with the receiver are not clear. I hope there is a V2 booklet!
SPECIAL THANKS to Christopher P. @ HH customer service!!

[RoostedFilms]

Man if this works... I'll be back. Thanks much better than only in writing . Thanks

[josephgreer]

Nice job partner, way to keep it simple, keep up the good work.

[mikestewart]

It’s now 2023… why can’t we just have an AVC on/off control through the power/settings button???

[RoostedFilms]

This works like a charm, Thanks so much !
I was struggling with the written instructions because they don't have the "fourth press" and hold in the instructions or the rebinding of the radio. Tons of help thanks again
CHEERS

[damaylaphoenix]

if you have a dx5 pro you will have to turn off the transmitter before you disable the avc. than turn on to bind !

[BDTennessee]

Awesome video! Good info to know for sure!

[SpeedSyko]

DUDE! Thank you!! This was very helpful!!

[johannesb.]

danke war sehr hilfreich, aber warum geht das beim SR6200A nur mit 22ms nicht mit 11 ms ??? und AVC ausschalten hört sich im englichen an wie ABC 😁😁😁😆😆🤣🤣

[offroadmarkt]

Not working with SR6200A. Did 1000 times. As decribed in manual, too. No 3 blinking at ON.

[edwincordero]

Once AVC has been disabled, can I use aux1, aux2 or aux 3 to power other servos or led lights?

[troywilliams]

Ok so do I set my throttle and brake before or after this do I bind it normal then calibrate then disable or disable then calibrate throttle and brake

[ygtx]

Please make a same kind of video for older ( bind plug models)!!

[RazorRC]

Good tip, very useful! Is there a specific orientation the receiver needs to be mounted in the vehicle to make sure AVC works properly?

[lazyalltime]

Waiting for the avc to calibrate/initiate makes calibrating 3rd party esc’s like Hobbywing a real pain, even after following this video to turn avc off it still take too long to start up and the esc wont calibrate. I have to pull the + wire from esc plug and use an external BEC to power receiver up first then wait for it to start up then power on esc and go through calibartion. I wil stick to sr315 and SR515 and use a 3rd party gyro if needs be. I will never buy one of these receivers again.

[marks]

Is there a way to vary a constant value with a knob on any of the transmitters (DX, NX iX)? For example, if I want to test various values for Expo. To be able to assign the actual Expo value to R Knob along with a range, maybe 0 to 50, and be able to vary it until I get a value I like. I know I can do this with switches and using different values but curious about doing it with a knob for testing.

[joseCalderon]

Damn that was easy thanks! I don't need AVC for my bashers 🤣👍

[subscribeme]

I disabled avc for my axial ryft. now no delay issue when I switch on the ryft.