How To Install Dirt Bike Graphics

Today we walk you through installing some Decal Works graphics on our Gas Gas 250.

ON X Off Road Maps Discount code: dbtv1

Jay Clark/Dirt Bike TV has been around the Dirt Bike industry for thirty years and is always looking to learn and help others do so as well. Give a follow or drop an email if you have any questions or comments. Thanks for watching!
Instagram: @dirtbiketv1

Thanks for watching, don’t forget to share and subscribe.

#graphics #dirtbike #howto

[paul.vanhout]

Not sure I trust myself with a torch😬. Will stick with a heat gun! Great lesson; you apply graphics almost as quickly as you dismount and mount tires!

[BrothersExtreme]

Jim is the most patient person I know!
Great video

[jondavies]

Real good tidy video really learned loads from this.

[a_drewski]

Put the graphics on wet and your alignment will be absolutely perfect every time and no bubbles. Use a heat gun and a squeegee and they stick just as good as putting them on dry.

[TheCarlejoseph]

Looks amazing! Great video. Thanks for the tips.

[speedfreak]

A few drops of dish soap/water in squirt bottle, hair dryer, squeegee. I've had good luck also with Equate Hand Sanitizer

[danarussell]

I’ve never been fast enough to need graphics. I do still have a crush on the old Bomber Girl graphics.

[hambone]

Thank you! I've been waiting for this video

[brianmorse]

Twitch likes it when you have FMF graphics... LOL I like it anyways that what my favorite race bikes have. big thumbs up.

[shonuff]

This video very relaxing I enjoy thanks

[Coldhart]

Would you recommend putting the graphics on the plastics while it’s on the bike ? Or would it be better to put them on if you just had the plastics off the bike? Thx

[lxzqs]

Can you use a hairdryer instead of a heat gun?

[miguelsimoes]

PLEASE HELP
Where did you get those louver decals i can't fime them anywhere ???

[coopergoodwin]

Do you need to use a heat gun for sticker kit

[hoosiertrailrider]

AKA how to singe your arm and hand hair off! 😁

[giedriusasnauskas]

do not use paper towels for cleaning, they are not suitable
they absorb the cleaning agent and begin to leave behind debris, a microfiber cloth should be used each time you clean
in addition, the stickers must be glued from one edge to the other to push out the air, and not to run it over the fork with your hand

[Josh-Silvia]

You make that look so easy. I can’t get it done without windex and a heat gun

[Waynegreenandco]

Trying to make a straight forward job look complicated with a heat gun. Hope you drain the petrol out the petrol tank when you use that heat gun lol

[KAOSshortyrip]

Should have titled this: Watch how fast the MF can get these stickers on

[MotoJB]

That torch is completely silly...heat guns arfe the way to go, if you need any heat.