Easy!! How to remove a stuck bit from an impact driver (Ryobi, Dewalt, Makita, Ridgid, Milwaukee...)

How to remove a stuck bit by yourself using pliers , zip tie or wire..

[HowToWithLech]

Easy quick hack when the bit is stuck and don't want to take apart driver.

[gforcekaras]

Zip tied, vise gripped and a lil nudge in reverse worked like a charm! Impact is useable again! Thank you!

[timcurry]

Thank you so much!!!! I spent 30 minutes messing with it with no luck. I was getting ready to take it all apart but your idea was perfect!!! You saved me lots of time

[ppen]

I know it been 3 years since you did this video, but theirs still a few like me. Who are first timers to have an event like this happen. THANKS YOU THANK YOU THANK YOU!!!!

[mjs]

Mine at least was still pretty tough to yank out, so I put the impact driver in reverse and popped it a couple of times which loosened it up enough to yank! Worked like a charm, thank you.

[joseriverajr.]

Thank you for your video..I just now watched your video and was able to take out a stuck bit out my Dewalt Impact Driver. God Bless You.

[WozzaD]

Worked with pliers holding it to the floor. Thanks

[anhuynh]

Thank you very much! After watching your video, I can removed two stuck bits from my Makita and DeWalt drivers.

[joecl]

The zip tie, vicegrips, and stepping on it method worked for me. Thanks for the tip

[jackflynn]

Thanks for the excellent video. Using a piece of #12 wire, some WD40, a vice, and a hammer, a thoroughly rusted-in bit sleeve finally came out of my Ryobi impact hammer.

[oosa]

I CANNOT THANK YOU ENOUGH FOR THIS VIDEO!!! Did exactly what you recommended with the zip ties and came right out!! If not for your video was ready to chuck my favorite Makiti screw driver!!!

[fillupbanks]

WHAT!! I MEAN.. WHAT!!!! THIS ACTUALLY WORKED!!! I been trying to get this bit out.. This was the easiest, and most efficient

[RudyMcDaniel]

Very helpful technique to unstick my Torx bit in my Makita impact. I tried everything but your zip tie vice grip method did the trick. Thanks very much!

[taylorsand]

Have to thank you man. This did the trick when nothing else worked.

[retrosniping]

Thank you kind sir. Zip tie worked like a charm!

[tqdam]

I ended up using a ziplock and putting the drill in a vice. Hitting the wooden block (buffer) against the slot. It worked like a charm. Thanks for the video.

[SuperVmaxShokk]

Thank you for this video! I never knew this type of drill was call impact drill. Mine got stuck and couldn’t find anything online, was giving up hopes until I landed on your video it worked! Thank you!

[butthz]

Worked like a charm! I used 2 2x4 to stand on to give me more room to clamp onto the bit. Yank, wiggle, out!

[taichi]

Awesome! The zip ties trick worked for my stuck Dewalt impact driver and Dewalt adapter.

[ryanslandandtreesvc]

You have officially paid your dues to the dyi society my friend. Thank you