Parts Bin Build, Rat King Sling, Part 3, Trying out Different Scale Transmissions, CustomRC

Trying out some of the suggestions I have received from you guys on the Rat king Sling build! The SSD scale trans is shorter but doesnt work with the RC4wd v8.

Check out my Amazon influencer store page for some of these products;

[kinslersrccustoms]

I think that looks a whole lot better you look even better to you if you mount a fuse box battery steering pump on the firewall put all that stuff on the firewall the noodle close that Gap in and look perfect

[gregory]

I always enjoy your vids and inspiration. Thank you for this

[tomjohns]

Trying to keep up with all your ideas 💡keep up coming

[Jeepy]

Nuts! Sorry Josh, I was so hopeful that trans would work. The one you have in there now looks like the first version SSD trans, that flat spot on the t case is distinctive.

[Nickwillfixit]

Try to find a beer barrel to modify to cover the servo and find a cap to glue to the side which will be the top as the gas tank and find a big radiator and fans to put in the bed out of the mud as many mud boggers have

[PupiDupi]

Great video, as usual. Move the servo inside the cabin and pivot the linkage for steering. Like on Bruiser. Then you can get rid of the grill.

[TheUncleRuckus]

You could always do like a keg style gas tank cover for that front servo, if you want to keep the grill off.

[Tom_]

That truck gives me Kingkong RC Q157 vibes, it looks great. For the transmission if there is no interior, mod an SCX10 3 gear trans like what's done to fit the ESP ANTI-SPUR MOUNT looks like there is enough room for a short driveshaft between the motor and modded trans.

[rcdrives]

Great stuff, man. It's getting there for sure.

[PoorParsley]

Very cool video as always keep up the good work that things gonna be badass

[ryurc]

You need to cover the servo with a moon tank or a fuel cell. I robbed some braided lines off of a model car that looked really good. Plug wires from robbing small wires from random electronics. I have a knee deep pile of what I call "keepers" really its a pile of broken crap I rob from
Love the builds bro

[amilcarmoncada]

Otro excelente contenido amigo, mis respetos y saludos desde Venezuela 💯💯💯💯👍👍👍👍👍🤘🤘🤘🤘🤘💯💯💯💯💯🙏🙏🙏💯💯💯💯💯

[Cap_]

Great Video! Can’t wait till’ May first!

[thegilsonguy]

Where do you get your rat rod body’s because I would like to build one but I don’t know where to get rat rod car/truck body’s from.

[scottydoo]

If you don't want to keep the grill.. See if you can get a ammo box or someone maybe able to make 3d print you one

[edwardbroyles]

I'm probably talking out my butt here. Is there a way to clock the transferred case? I've done that on full size vehicles, trabsferr cases, turbos, etc.. to get clearances. I don't know enough about this application so I'm just guessing.

[matpellerin]

What is that gear greas you use thanks

[noahsaatkamp]

Are you going to post on chopped toys anymore