How to retrieve keyless entry code to 2013-2015 Ford Fusion DIY

This video will show you how you can retrieve 5 digit security entry key code for your 2013 through 2015 Ford Fusion. You do not have to take the vehicle to the dealer. this will save you at least hundred dollars.

Disclaimer:
Warnings And Caution

If you follow the procedures, techniques and methods shown in this video, be aware that you follow them at your own risk.

[olusholasoyoye]

Thanks for this video. I was able to retrieve mine without removing a bolt. I squeezed in my phone at a very tight angle and moved it slowly in and out at various angles with both video recording and flashlight on. My flexible phone covering was badly damaged but after replaying the recorded video, I was able to retrieve the code.

[Slick]

Thank you for posting this! I was BARELY able to retrieve the code without even removing the bolt! I think I was luckily, but I kept looking and slowly moving my phone around and finally saw the tag in the reflection through the phone and was able to get a clear picture of it! THANKS!

[BrianReyesFilm]

Bro! Thank you!! Dealer wanted to charge me to get the code after I bought the car from them. You saved my life! I didn't even have to remove anything. There is a gap behind the module and I was able to use a mirror with a flashlight to see the code. Thanks man!!!

[JoshJos-Shwa]

Thanks for the great info man! Got my code in a few seconds with a mirror and flashlight.. Didn't even have to take the fuse board off its mounting.. Bada boom

[jessecamaninga]

Saved so much time and money. Many of the other videos have you hunting for a code. Worked perfectly on my 15 SE

[marisdad]

It was a pain, but once I got the nut off I was able to slide my phone in like someone else and recorded the video of the code. Just a pain to get to, but I'm no longer concerned about being locked out of my car! Thanks a bunch bro.

[cwretgeorgew]

Thank you for sharing. Ford wanted to charge $345 to retrieve the code because I only have one key. I retrieved it myself with the help of this video in about 20 minutes for $free.

[blakkjak]

Thanks, Did this with my Cell phone using video and flash. Was a little tricky but I angled it to look behind it. got everything but half of the last number without removing bolt.

[derpderkaderr]

Thanks! This video saves people a lot of money.

[leonerybh]

Awesome, i didn't knew was my factory code and help me too much
thank you, congrats !!

[peggyquint]

Thank you Thank you Thank you!!!! I didn't have the second key.  I found the code in 15 seconds thanks to you.  Saved me $75.00 and a 60 mile trip to a dealer!!!  YOU ROCK!!

[ithinkwecannabis]

For those of you with out one of those mirrrors like me set your cell phone to record with the light on and stick it behind it that what I did worked great you may still have to pop that bolt to get the whole code

[sgerritsma]

Very helpful. I purchased a 2014 Fusion SE with only one key and no code. After loosening the 10mm nut, I was able to see the code using a mirror. Entered the code in My Ford Touch settings, and was able to add a couple new codes. Worked great. Thanks!

[naser]

Thanks man that was awesome, the locker smith didn’t opened it, but your video did 💋

[stevenjamessmith]

Great Video. I found my entry code on my 2018 Ford Fusion. You should also explain how to remove the trim. I had to look that up. Basically I just carefully pulled on it until it popped loose. Then I used a 10mm socket and 2 inch extension and a small wratchet. I only loosened the fuse panel. I didn't want to try to unplug all the wires and cause other issues. After loosening the fuse panel, I pulled it away from the body of the car as much as I could. Then stuck my iphone behind it and took about 10 blurry pictures until I got one I could see the entry code on. I later found out i could change the frames on my iphone live pictures and found a really clear frame.

[JJ_Green]

You’re the best!! This is old lol but it help me reset it

[jamesshaw]

that helped out alot was right where he said it was 2015 fusion titanium thanks bro my keyless push start fob is broken and i haven’t been able to lock it because the guy i got my car didn’t have emergency key and the buttons don’t work now i can lock it

[SouthMainAuto]

Good to know thanks. It is always on the SJB?

[lawdog]

Easy way, take your phone, go to video, turn on torch, record, put phone behind the fuse box. Move around a little for about 15 seconds. Code came in clear as day.

[Bachelorf]

Worked great. Only had one key so had to find the code somehow. Well done and thanks so much for the help!