Super Glue and Aluminium foil ! Pour Glue on Aluminium foil and Amaze With Results

Hello everyone! You are watching video "Super Glue and Aluminium foil ! Pour Glue on Aluminium foil and Amaze With Results"
I hope you enjoy watching my video!
On Creation Holic channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Creation Holic ☞ Do not Reup
#diy #diyprojects #tipsandtricks #recyclediy #superglue #aluminiumfoil

[thomaswolff]

I see... the aluminum foil with the super glue helps you put your hinge on crooked. Nice!

[gertbenade]

You forgot to mention that the LEDs inside the lamp is at HIGH mains voltage (depending on lamp design) since there uis no galvanic isolation and pose a SERIOUS risk should you inadvertantly touch any of the components on the PCB. Do not try this at home!

[BusinessButlers]

Great hacks except for #4 which is downright dangerous.

[christopherlatham]

For number 2 use a few toothpicks and a bit of wood glue or even simple white glue.

[alisonmary]

Thank you, very useful tips with things at home. Great when you're in a hurry or for an even elderly woman on their own .

[shawnmurray]

Better way to do #2, just fill the existing hole with superglue, let it sit overnight & screw the hinge back in place. The fiberboard will absorb some of the superglue, the rest will harden in place, and you'll have a small dimple in the center where the screw goes. For hardwood doors, use superglue or wood glue and a toothpick or small diameter dowel.

[Semiretiredworking]

I roll up aluminum foil into a ball to clean the grates in my charcoal grill. Works great.

[OsmanKErol]

Do not solely rely on the switch before starting to remove the LED. Most of the switches cut the current on one line, therefore if you connect the switched line to Neutral (you have 50% of chance) then the live line will not be interrupted and you may get a shock when you touch the burned LED (depending on the position of the LED on the LED string, especially if it's close to the high voltage side) with a conductive tool. Totally unplugging the system from the mains is the best choice.

[jessisanturo]

You did not just risked yourself and taught kids to risk themselves getting electrocuted to smithereens to save $2 bucks ? Dude.

[prooffypro]

If the switch at 3:00 min is SPST, you should be at danger... It should be DPST switch. Or you have to disconnect the plug from the main socket.

[catherinewhite]

Some interesting ideas. I’m not sure I’d take the time to deal with an LED bulb like that though. It was still a “shaky” lightbulb. That would drive me crazy.

[Regoriroger]

On #2, you could have just stuck toothpicks in the original holes and screwed everything back in place. The screws create new threads in the toothpick as you screw it down. Much easier than what was shown here.

[roscioocasio]

Thank you Creativeholic for this handy video. Thank you to the Community Members who also provided useful information as well. Best Wishes to all of you!

[petervladyevich]

Thank you for all these exemples. With these knowledge i can make a lot of repairing

[isailyai]

سلام از ایده‌های شما استفاده می‌کنم و بسیار علاقه‌مندم
من این روش را تجربه کردم و عمر لامپ‌ بعد از تعمیر کمتر از ۷ روز مجدد می‌سوزه،ولی این روش برای لامپ‌های بالاتر از ۲۰ وات بسیار مفید و عمر لامپ طولانی‌تر است.
موفق باشید💐

[Alotipsalo]

"Wow, this video blew my mind! Using aluminum foil and super glue to fix various items is such a genius idea. I never thought these everyday materials could be so versatile. Can't wait to try out these hacks myself!"

[DIYTechTrends]

That sounds interesting! What's the purpose of pouring glue on aluminum foil? Is it to create a new super adhesive or just to test the glue's features?

[ibapreppie]

Thanks, thats 6 mins I'll never get back.

[Patty-ws]

Your ingenuity is purposeful and boundless!!! Keep it up!!! Genius and waste not want not are always appreciated!!! Robert W Goodwin MD aka Db

[troyallen]

That LED isn't going to last without the proper ohms