ULTIMATE 3D PRINTER TUNING GUIDE for the ELEGOO Neptune 4 plus / pro / max

Here's everything you need to know about tuning your ELEGOO Neptune 4 3D printers.

#ELEGOO #neptune4 #3dprinter

[iochhi]

I think it means a lot when I tell you that we have been waiting for a long time for you to make a video showing how you configure your machines to obtain results as good as your videos. A big hug and greetings.

[vikis]

One off best videos what i have seen about tuning! Not too long and not too short, and not too complicated to understand all the calculation! Nice! Thumbs up from me!

[TheHikingReader]

The timing and thoroughness of this video couldn't be better as my new Neptune 4 Plus just arrived yesterday and I plan to work on getting it assembled tonight and work on tuning it over the weekend! Thanks for so much information and how well it was presented here!

[MrAlan]

Thank you for this video. I love and support Canadian content. This has helped me setup a Amazon return of a N4 Max, sold as open box for $299.99 CAD everything inside was loose and warped, dropped . I put it together and it printed garbage, then after watching this I fixed, updates, calibrated and have done more, final results were night and day,

[realrek]

Neptune 4 max here.
I was just looking to calibrate all the stuff again properly now. After 2 weeks of playing with it.
It's pretty accurate right out of the box but i'm now dealing with some blobs and zits on large arcs.
I learned a lot and also will try the orca slicer now. Thanks :D

[LexxDesignD]

Perfect timing I was just about to tune my Neptune 4 Plus! Thanks man!!!

[josephtayor]

Thanks man. I literally just unboxed my first printer which is a Neptune 4plus

[colororb]

Thanks! I was literally planning on doing this tonight but didn't know what order to run the Orca Slicer calibrations. Now I know!

[UmutErhan]

I just got my Neptune 4 Plus today! Already finished the test filament inside and I'm waiting for the new filaments to arrive. I will try these thank you! Also, It might be a good idea to heat the bed even before the manual leveling

[DDubief]

I actually waited til this weekend (received my brand new Neptune 4 Max back in Nov 23'.) Decided to wait for upgraded firmware and components (Linear Rails X/Y/Z and upgraded Hotend "MicroSwiss Flowtech") Couldn't be happier and going thru this tuning will make it a breeze to get thru my 3 Main Filament choices (PLA+/PETG/PET-CF). This testing also pointed out a few flaws in my install so far (such as un-greased linear rails causing massive X-axis jumps), all of which a bit of grease/oil smoothed out. Can't wait to get back into this though, my Ender 3V2 will also likely get the treatment as I transition that machine to Linear Rails and Orcaslicer.

[acehole]

Thank you for this. I'm pretty new to 3d printing and this helps a lot.

[BenRichard-yu]

Thank you so much for your neptune 4 videos, all of them have been helpful for neptune and klipper noobs.
is there any chance you could make a part 2 for your first video "How to Tune The Elegoo Neptune 4 Klipper 3D Printer for Better Print Quality (Step-by-Step Guide)"?? Ive been trying to learn more about klipper and add more stuff to it like different macros, screw tilt adjust, and probe calibrate so im not constantly messing with z offset.

ive suggested that video to a lot of people on reddit and it's been a lifesaver for us klipper noobs but Id love to learn more and your teaching style is so easy to follow. Plus there's so much to learn on the klipper3d website but I understand not everything is compatible with the elegoo version of klipper so Im mainly wondering about what other cool stuff that can be done with

Anyway Im subbed so im praying you end up making a part 2. The cool things to print videos are another of my favs not

[luismendes]

Thanks so much, I recently bought a Neptune 4 Pro printer and printed the tests that came on the flash drive without any problems, but after that, everything changed. I'll follow your tutorial and see if I can get good prints using the Orca Slicer. Thanks

[teamtyrantmotorsport]

Elegoo should be paying you for this video 😁 😁 excellent information.

[YakovK]

thanks for an amazingly detailed video!

[LuckyWabbitGaming]

I have been printing on my Elegoo Neptune plus 4 for about a year now, you showed me some things I never knew, sadly I have been using the manufacture suggested Cura slicer this whole time :(

[tons]

Thanks for this video. This is my first printer. I purchased it because my son was begging for this. Now we cant seem to print anything but the samples that come on the usb. I am going to go step by step tomorrow and hopefully this eorks out. Thanks again.

[Gershy]

Are you using elegoo PLA? Also my Neptune 4 pro doesn't have built in input shaping, any recommendations?

[jinda]

Thanks!! The input shaper nozzle calibration are not in the update for the elegoo neptune 4 pro. Or I did it wrong.

[nacho]

hi men, tks for the video. The only thing i dont under stand is all the test print are i do are a lots longer than yours, i compare every settings in the video, are you change other thing directly in the printer maybe? i have the neptune 4 plus