Great Idea !! multifunction safety hand jig

#woodworkingjig #Safety #plywoodworking
Please Subscribe and share this channel!!
join on Plywoodworking Tips & Trick Group on FB !!
easy for download FREEPLAN

00:00 - Intro
01:59 - Cut & assemble plywood
03:10- base
06:32 - slider
08:34 - Test cut

i get this idea from accident i had, this is safety hand cut. Ypu can use 1 few function firast free hand mode, crosscutt 1 and 2.
very safe and easy, working using this jig
hope this video can give inspired

---------------------------------------------------------
Music Track:
Acoustic Inspiring Soft by RomanSenykMusic.
Acoustic/Folk Instrumental by Hyde - Free Instrumentals
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
🔻
"Keys of Moon - White Petals" is under a Creative Commons (cc-by) license
🔺

[pemtax]

So sorry about the mishap, this is really a wonderful jig to prevent a repeat showing. Thanks for sharing both the backstory and solution ... we can all take something from this and hopefully be smart enough to learn from it. Cheers!!

[venelintrifonov]

Wishing you a speedy and full recovery.

[bradleytuckwell]

I did wonder why you were wearing the glove but I didn’t want to ask.Now after seeing the damage I’m so glad you still have the full use of your thumb.
And your jig I don’t now how you keep coming up with these master pieces but you keep delivering this one is a very safe one for your fingers I’ll be making it for sure thank you once again. I always look forward to your channel.

[andyfarmer]

Fantastic jig. Wishing you a speedy and full recovery.

[GilangPIP]

Biarpun pernah luka, pakai sarung tangan sbelah udh jadi ciri khas channel abang, next pakai Glove dengan logo abang sendiri biar makin kece buat video nya bang, semangat buat para pekerja keras

[henryrossouw]

Great idea.Will surely built me one cause the other day router also pulled my piece of wood out of line.Was really scary.Stay safe.

[norbertgallice]

Good morning. These are very useful and efficient tools. Thanks for this Friendship to France

[pdstokes]

What a great idea, think I'll have a go at making this as I'm rather fond of my fingers 😄

[doc]

Nice work.

Thanks for taking the time to upload the video.

Hope your thumb gets better over time.

Regards from Australia

[MCsCreations]

Really fantastic jig, dude! It's definitely much safer using it! 😃
Thanks a lot for sharing! And I hope you can have a full recovery from the accident!
Stay safe there with your family! 🖖😊

[javierguil]

Great job. I take the idea from him and wish him a speedy rehabilitation of his thumb. cheer up

[captainbeefheart]

Great jig, thanks for the detailed video!

I have one suggestion for improvement: If you drill shallow pocket holes for Neodymium disc magnets in both the runner and the base, you can have a snap on system for changing the runner orientation. Much quicker to change orientation and since there is no axial load on the runner it shouldn't snap off in use.

[charlesdavis]

I subscribed to your YouTube channel a few months ago and and I have watched most of the videos that you have posted. I really like the jig you made for the router table that you illustrate in this video. I have watched a lot of videos where people are using the router table and I cringe when I see them getting their fingers close to the spinning bit. I just had a couple of questions about this jig as to why you only made one and made two slots in the bottom and need to change positions of the tongue that rides in the miter slot of the router table. Would it be less time consuming to have made two of the jigs and had one with the tongue in one position and the other with the tongue in the other position and simply change out the jigs depending on what position you need to have the tongue? I am also thinking that the more you have to screw the tongue in place and unscrew it to change positions, the holes will begin to tear out. Putting them in a fixed position in the first place would allow you to have glued the tongue in the slot for a more permanent fit and less wear and tear on the jig. Just something I noticed and wanted to suggest to you to provide a little helpful advice. I really enjoy watching your videos on your channel.

[PlywoodCreative]

very good idea and very useful thank you brother for sharing the video.🙏

[TRUCKTUBEGAME]

Greetings from Belarus. :) The design is not made high? The cutter overhang is large and there may be some embarrassment. And so cool!

[Amael]

ohh I got my finger cut at exact the same region like you.. circular saw

[bryanthebricki]

Tried and Tried on Facebook to download the above jig plan but can not find it😪😪

[Araldwnn]

Using gloves while manipulating rotating machines is extremely dangerous, and should be avoided at all cost. That's one of the first things you learn at wookworking school. If the glove is ever caught by the tool (blade or else), you won't be able to get your hand back and instead of almost loosing a finger, you'd certainly loose the whole hand.

[василийкузнецов-ги]

당신은 당신의 손가락을 많이 망쳤습니다, 형제! 뭐가 그렇게 매웠어? 피곤한? 휴식을 취하다! 일이 안나왔어? 휴식을 취하고 차를 마시십시오! 잘 지내세요! 아름답게 만들어지지 않은 작은 부품을 안전하게 처리하는 모든 장치를 사용하면 인체의 아름다움을 유지할 수 있습니다.
you've ruined your finger a lot, brother! What was it spicy? Tired? Have a rest! Didn't work go? Take a break and have some tea! Take care! Any device for the safe processing of small parts, even not beautifully made, allows you to preserve the beauty of the human body.

[davidkohcg]

Please throw away your chicken feet pushing stick for your table saw. Make a better pushing stick will prevent accident while using table saw. Don't use gloves when using rotary machine.