How to replace the chuck, drill head for all types of drill

Hello..
Today a drill hack..
Easy way to replace a drill chuck Becomes keyless drill chuck..
may be useful

I Hope You Enjoy This Video. If You Like This Video Then Click On Like And Subscribe My Channel For More New Videos.

THANKS FOR WATCHING

Please like, subscribe and share
Subscribe here

[hughtierneytierney]

I spoke with a professional tool repairer today and he said that often it's just not possible to get the chuck off a cordless drill. He said it's because they can be so powerful that the chuck is effectively locked on and that if you try the 'hitting the alan key in the chuck method' you'd end up bending the spindle.

[katlegofellie]

I a had thought to replace it with a spanner without disassembling it, I love it so great and quick..

[jacobomatheumarroquin]

Excelente video bien bien claro muchas gracias. Pregunta. Este tipo de mandril aguanta trabajo pesado como hacer agujeros en metal primordialmente. Saludos y gracias. Desde Guatemala

[karakantouvalos]

That's fine and dandy, but what about taking the screw out before removing the chuck and replacing it after the new chuck is installed?

[vladster]

Thank-you . I am learning from you You-tubers

[Michaelinstallertv.]

Ayus sir. Magpapalit ako ng chock ng drill.

[jaydee]

Have a 20 volt craftsman with a keyless chuck. Either the "screw" takes a tiny tool, or I have no screw like this one. OBTW- Craftsman, help does not seem to have heard about this setup

[AutodidactEngineer]

I said this on another video but I'll repeat it again for people who don't know> if your drill does not have a spindle lock don't even attempt to install a keyless chuck because you won't be able to reliably tighten it!
Instead a keyed chuck is designed for such drills.

[therenaissanceman]

IF you have a newer model you still have to remove the body to get to the hub.

[tehranboys]

i have an old drill with 10inch manual chuck... ...can i change to 13mm keyless drill chuck?

[johnbower]

Was there a reason why you did not insert the machine screw straight after mounting the chuck, especially as the chuck had already been tightened with the large hex key.

[franciscosolicar]

What is the size of the open wrench we are going to use?

[edselexie]

Is that applicable for impact drills? Does the chuck won't loose while drilling? It's keyless without holding bolt.

[krishnagraphics]

Sir very nice vedio
Normal drill chuak convert to hemmer drill bit chuck

[nuboyhere]

Does anybody know how to pull apart a Skil chuck? My drill is the 6555A, 13mm model, and doesn't have a central screw inside the chuck. That's why I don't know how to even start the disassembling. Thank you in advance.

[brandonvanevery]

Jaws of my keyless $40 Ryobi corded drill were frozen. Victim of heat or fine dust, not sure which. No way to hold a bar to remove the chuck. No obvious screw. Took off case, think the chuck is designed to be difficult to service. Returned it barely within its return period, got my money back.

[alexiz.]

My problem here is my wrench is to thick

[davidr]

Fail. "all types of drill" do not have flats for using an open end wrench to secure the arbor, the Makita I have in my hand, nor none of the three old Craftsman's I have.

[anakngpating]

No need wrench to remove chuck. Just hammer the Allen key

[davidwillard]

I Don't !See any real Gain in Replacingt a Thirteen with a Ten ! Cap ! Any Better !