How to replace drill chuck

REPAIR

HOW TO CHANGE THE DRILL CHUCK

#IMPACT DRILL
#ANGLE GRINDER
#TECHNICAL BABAJAN
#POWERTOOLS
#DRILL CHUCK
#BOSCH
#MAKITA
#DEWALT

[edwincabuhat]

Sir thank u sa video mo natuto ako pano mg replace Ng drill chuck more bless sa channel mo sir..now I know...yes!!

[tony]

Open the chuck jaws. Remove the screw located in the centre. Fit a 3/8" (10mm) Allen key into the chuck and tighten with the chuck key. Smack the end of the Allen key with a hammer in an anti-clockwise direction and it will unscrew from the machine. Refitting is a reversal of this procedure. You do not have the split the drill body.

[Subgunman]

Let me give you some words of advise.
Get some sheet lead and line those jaws with the lead. Clamping down on those gears with steel jaws will ruin some gears. The lead will cushion the gear while holding it stable.

[virus]

Very helpful boss galing napalitan ko na chuck ko nabasag kasi ang bit kala ko may naiwan pang turnilyo big help talaga

[SbusisoGungqisa]

Thank you very much, now I can easily replace mine🇿🇦

[neilci]

kafi bidwan ho bhaisab aap..gear ko vice me tight kardiye bina packing k... naman aapko

[welostourdemocracy]

Great Video!

This is the only way to change the chuck if your drill spins too loosely to untighten the chuck the other way. The other way is tightening the chuck on a hex wrench and hitting it with a snap. My chuck was actually stuck in the open position so I couldn't tighten it on a hex wrench....this video saved my drill!

Thanks.

[BagsRivaRaet]

Nice dahil sayo madamikang natutulongan mga carpenter

[jobgraciabargamento]

Thank you po Sayo sir.maaayos Kona itong sira na electric drill na SI na Ang drill shop.

[KarenGonzalez-oxsd]

Amigo creo que debiste colocar algo, entre las quijadas o mordazas de la prensa, algo así como unas tiras de madera, para no dañar el engrane.

[roypjohno]

HAI GOOD AFTERNOON SUPER idea SUPER WORKING SUPER Replace Another THANKS 👍👍👍👌👌👌🌹🌹🌹

[rebeccaabrenica]

You replace the chuck but you damage the gear.

[worldeducation]

Thanks it is good video but it can be replaced without opening the cover..

[kudalauthebat]

lol.that was easy.glad the gear didnt break when you lock on the vice.😅

[cachhomevideo]

Thanks for video now I can replace my drill chuck

[fernandojimenez]

Desde colombia. Gracias por el video. Solo es que el tornillo que sujeta al mandril es rosca izqierda para que tomen nota y miren como gira el destornillador. Gracias vale.

[melvis]

Great job and good video if u move the music🙏👍🤣🇩🇰

[Masterj]

Next time, place 2 chocks of wood between the Vice walls.

[kamleo]

Thanks for the video. If the video had been available many years ago I would have replaced the chuck on my old B&D. Replacement parts were more readily available and cheaper. These days the replacement chuck costs as much as a new drill so I would just toss the worn-out B&D and buy a new one.

[frankdavidson]

you have seen the hard way now i will tell you the easy way place drill in vise open chuck insert screw driver turn clockwise to remove the screw insert the key in chuck give it a good (WACK) counter clockwise now unscrew old chuck add new chuck install scew counter clockwise you are thru a 5 min job..