How to fix Ikea pax sliding doors problems.

How to fix Ikea pax sliding doors problems. I will let you know few tips on if Ikea Pax sliding doors not aligning up also will explain what to do before and how to avoid not even pax sliding doors. There are few options on how to fix Ikea pax sliding doors if you have a problem between pax sliding doors or on the side where Ikea sliding doors go over side panel or stopping too early. Ikea pax sliding doors adjustment can be done on the top hinges or easier way and I would say more effective if you have big differences between doors. If Ikea pax sliding doors not level and you did Ikea Pax wardrobe frames correctly usually floor can be not in the level and that one of the possibilities why Ikea pax sliding doors not level with Ikea Pax wardrobe frame.

ONLINE SUPPORT:
Here you can get extra online support if you having a problem with assembling your Ikea furniture. Online support one to one video call will be available to Patreon supporters and all funds will go directly back to the channel helping buy better equipment enable me to spend more time to continue creating more Ikea furniture assembly tutorials. Thank you for your support.

Here is 3 different ways how to assemble Ikea pax wardrobe frames;
IKEA PAX Wardrobe Assembly (PART 1)

***Tools I'm using ***

Small electric screwdriver

Bigger drill and screwdriver all in one

For more tools for furniture assembly or general DIY adventures.

Here is my stuff :

[laurasaor]

You’re literally a lifesaver. Been struggling for 2 days because one of the doors wasn’t symmetrical with the frame and we fixed it thanks to your tips. Thank you!!

[Sabdi]

I can’t believe after so many months my wardrobe has now been fixed after watching this. I had a huge gap on my sliding door that would get bigger as it went down. I tried everything and nothing worked. It really baffled me! But I did what you showed me and the gap literally went straight away. I didn’t realise how uneven my floor was. Thank you!

[arcalan]

I really thought the movers messed up my wardrobe during the disassembly and re-assembly. This video and a folded piece of cardboard fixed the problem perfectly. Thank you !!!

[VeeDuggie]

Excellent clear instructions and helped reduce loads of stress AND prevent a divorce 😂😂👍🏾👍🏾🙏🏽🙏🏽

[stanislavp]

Thanks for the video! Helped me a lot to fix not even sliding doors!

[kimchan]

Very helpful video. I have a similar Pax unit with Hasvik doors with this problem. I think many houses will have uneven floors and your shim fix to square up the doors to the box worked wonders. The doors are even to the frame and the pull-out drawers are no longer bumping into the doors.

[niravac]

Really helpful. Had similar issues with my wardrobe but I’ve fixed it myself. Thanks for the tips mate! Absolute legend

[Fantazyoosh]

Hi, thanks for amazing PAX series, it's very helpful. Got another problem and maybe you can give me some tips? The back door is getting in contact with both top and bottom white sticky strips attached to the front door. Effectively it slows doors down or getting one dragging another with it. I did everything like in manual and I'm out of ideas. Is it supposed to be like this? Is it a bug?

[hen-rex]

Thank you for this — goes to show I will never pay for IKEA assembly services.

[TBRchild]

I noticed that fitters from IKEA did not screw wardrobe to the wall IKEA always recommends that wardrobes are fitted to the wall this stops them falling over and keeps them stronger you may need to fix a piece of wood to the wall if you have skirting boards so they are level and not being pulled backwards this will damage wardrobe if you do not fit wood !! if you have 2 3. 4. Or more in a row you should also screw them together on the internal sides IKEA supply special screws for this that screws male / female that screw into each other so look tidy and use wedges and spirit level to make sure all wardrobes are level when fitted you should have wardrobes that will last years . If not fitted correctly heavy doors will rip of and you will need new wardrobes remember it’s all chipboard so it needs to be fitted rigid so it does not move . With a bit of skill you can do many things put tv inside make office desk inside I have done both for my children and they love them .

[prajnaacharya]

U have explained very well.
I have same type wardrobe due to gap cockroach n dust is entering. Clothes r not safe. Plz suggest solution

[jamiejohnston]

Hi, thank you for your videos but do you have a video of solving the same issues with the latest Pax sliding door system?

[kamilag]

Hi! My doors got stuck together as the one underneath jumped off its rail and is now stuck between the rail and the outer door. Is there a way to fix it?

[saffiekaur]

Thank you for all your help. Excellent very clear advice

[SH-jvip]

Thank you for your advice. Fixed my side gap perfectly in a couple of minutes!!

[placacentrocasamania]

Carcase leveling is problematic when the floor is not rigid.
I think that if you put a rigid base under each leg leveler will be easier and last in the future.
saludos
Gerardo

[bambosantoniou]

I am having trouble getting the sliding inner door to line up with edge of side panel. The fitter left the unit with a tappering gap between the fixing wall and the side panel. if he tightened the wall screws to get rhe sude panel flush with wall then the inner door overhangs the side panel at the bottom. What us the problem and how can the door be adjusted to fix the problem? Otherwise I have an ugly and tappering gap between side panel and wall which you see when you enter the bedroom.

[darrenstrange]

This is a great video, I really struggled with my PAX and followed your instructions and it came together much more easier. Way more complicated than I imagined!!

But I have one question. The left (inner) door slides easily and smoothly. But the right (outer) door feels really heavy, stiff and slow when sliding. Do you know why the outer door feels so different? Is there something I can do?

Thanks :)

[edgar]

Thanks. Do you have an updated version of this video for the newer sliding doors? I assembled my wardrobe (4 x 75cm) according to your videos and the manual, no parts left, but the doors don't open wide enough. Luckily I can use all the drawers. Do you have any advice or a newer video? Thanks.

[courage]

came for the tips, stayed for the ASMR