Volvo S80 parking brake basic maintenance

preview_player
Показать описание
In this short video I'll show you the process of changing Volvo's S80 handbrake pads (shoes) with basic tools. I'll guide you step by step how to disassemble, clean and reassemble all components.

Рекомендации по теме
Комментарии
Автор

Edit: I used too much anti-seeze in this video ;) On bolts you'd better use thread-locker. As it was my first automotive video I guess it came just right. Thanks for all feedback! I'm about to prepare my both volvo's to upcoming winter. Any future videos thoughts?

gregor_b
Автор

Jack, you ARE the man for showing how to get that retainer spring off in detail with the hook! Saved my ass.

fewhite
Автор

Oglądam twoje filmy z powodów rowerowych. A tu masz VOLVO!!!! Szacun. Nie można kłaść pasty miedzianej na piastę!!! Tam są elementy aluminiowe (np felga). Zapieczenie po sezonie zimowym gwarantowane. Pozdrawiam.

mutos
Автор

I tried this with my V70.
I had a hard time getting the spring on the left side. The package I received had a spring that was smaller than the original. I put the original back on. To get it on, I put the bottom on first. Then I used a long screwdriver, used the hub for leverage, then lifted the top hook into the hole. It didn't go all the way in. I put the screwdriver into the first rung on the spring and leveraged it up slightly higher. I used a second screwdriver to push it all the way into the hole.

I couldn't get the rotor to go back on. The new pads were thicker than the old and the rotor didn't fit on. I was hot and sweaty so I put the old pads back on until I can figure it out.

The video was great. I took notes and followed step by step and it was perfect . Thanks for the video.

arnelebrato
Автор

I see you removed the caliper assembly in one go, instead of taking it apart. As I need to do just the parking brake, that saves time and fiddling. Thanks for showing that and the whole job. Nicely done.

A shot of the chemicals you used could be useful, and as already noted, locktight on the bolts is advised.

I feel happier about attempting this after seeing your video.

simontee
Автор

Thanks for uploading. Nice edit with speeding, inclusion of background sounds and relaxing soundtrack. Fixing my '06 XC70 DIY FTW

aramscholten
Автор

I dont even own a car, i actually rader go everywhere pedaling on my mtb, but your vídeos are so interesting to watch, good job man!

mauriciovalenzuela
Автор

Thanks for this very informative video!

This is quite possibly the worst job I've had to do on any car, so I found your video very useful :)

zingzangwallawalla
Автор

this has got to be one the most interesting and entertaining videos I've ever seen I've got to do this on my car today thanks very much for uploading this amazing video😎

niteblaster
Автор

With all that beautiful job, the one thing I would say is that; changing the brake discs at the same time would have be bonus. But we’ll done 👍

Confirmdad
Автор

Nigdy nie smaruj piasty auta, na wejsc na czysto - kazda pasta to micrometry itd- wyczysc i wrzuc na sucho :) dobra robota

zyciejestpiekne
Автор

Beautiful video. What are the two sprays you used?

phdt
Автор

Thanks for taking the time to make the video, I'll be performing this shortly

MrHavingfun
Автор

Sehr gut gemacht 👍👍👍😊So mache Ich es auch.
Klasse Kompliment
Aber Ich Schleife mit einer Feile auch den Bremssattel aus, damit der Rost raus kommt.
Aber hast Du sehr gut gemacht. 👍👍👍👍👍👍

thomaskramer
Автор

just wish I could work as fast as you, 20 minutes and the job is done!

walterschwenk
Автор

Did this a few months ago, that damn spring in the back lol. Only problem I have with mine is it doesn't really hold good going forward, but backwards it does fantastic. Still trying to figure it out.

SyntheticVisionsAutomotive
Автор

Rewelacja film. Dzieki za podzielenie sie wiedza !!!

tomasztomasz
Автор

You could change the brake caliper rubbers at the same time, you don't need to lubricate those parts, as long as you clean them
.

markopiirala
Автор

A bit too shaky at the start but got better, too quick of a view for socket size readability, but thanks. Should hold up what ever you are spraying so us amateurs can see what you are doing,

mjohnsimmons
Автор

Dziękuję za udostępnienie właśnie się zabieram za to w moim s80 ll

lukaszpbear