How to connect vnetphone 1 V4 and 2 V6 maxquall intercom BEST VALUE!

Need to connect your Maxquall v4 or v6 intercom? It can be a little confusing because it doesn't come with instructions. In this video I will demonstrate how to connect them.
This way you can talk in a "conference call" mode simultaneously. This is one of the best intercom system available for Bikers, it can connect up to 6 Riders, Voice call and Music quality is the best even at higher speeds.

[KeystoneAthletic]

This tutorial is better than what Ejeas and other manufacturers provide for syncing instructions. Thanks!

[codytotten]

Lord they couldn’t make it any more confusing to simply pair these up. Thank you soo much for the informative video.

[martinpier]

Tx from Germany - they did it so none understands it - so, thanks a lot, now they work!

[csustello]

Hey bud
Our group of officials loves this vid, so helpful thanks for posting !

[johndiaco]

Your was the only video that was very. Helpful tx again

[ronaldacohen]

Really helpful - got these to sync on first try. Let's hope it works come game time...⚽

[rodwhite]

Excellent Video! Just purchased and waiting to use for Refereeing!

[countrycitymedia]

Yay! Mine are hooked up! Thanks so much! You are the best!

[matteocarlini]

The other way I can tell which headset is mine is because I bought ear pieces for the Right Ear for the ARs. I feel more comfortable with mine in my left ear.

[ZacKreiss]

I thank the Lord every day for this amazing and informative video.

[ianwhybrow]

how do you reverse the headset to fit over the right ear instead of the left. I don't want to break it.

[matteocarlini]

I bought these exact same Headsets for refereeing Soccer. I bought for and I labeled them Referee, AR1, AR2, 4th Official. I know labeling them might seem crazy but I want them to be designated for certain Referees. I numbered my head headsets 1-4. 1 is mine because it’s the main one and 2 and 3 is used for the ARs

[ts]

Instructions for (one) EJEAS V4 and (two) V6s:

Part One
1) Turn on V4 and V6#1 (on V4 the green phone button, on the V6 the motorcycle button)
2) Pair V4 A (press button until flashing blue/red) to V6#1 C (press button until flashing blue/red - do this at the same time as you do V4 A) - will flash blue together when in sync ~3 sec
3) Press V6#1 C twice - allow about 3 seconds between presses to cycle - confirm V4 and V6#1 can "talk" (that you can hear in each mike & speaker)

Leave V6#1 on

Part Two
1) Turn on V6#2
2) Pair V4 B to V6#2 B (as you did for V4 A and V6#1 C above)
3) Press V6#2 B twice (as you did for V6#1 C)

Leave V6#2 on

Part Three
Press V4 A - all 3 comms should now be paired up and confirm that you can talk and hear each other. If you cannot, turn all 3 off and repeat this process.

To turn the comms off - V4: press the FM and phone button together; V6: press the very small button above the phone button.

FAQs:

YES - you need to pair the comms up each time you turn them on/use them.

NO - Three EJEAS V6s cannot sync up for crosstalk together. You WILL need a V4 as the controller comm. Three V6s can talk to each other in an intercom mode (one comm to another).

For four EJEAS comms, you will need a pair of V4s and a pair of V6s. I may create a similiar instruction set for that at some point in the future.

[moissosa]

saludos, e visto que existen diferentes tipos de V4 tales como V4, V4-pro V4 C y creo que una versión mas y tengo conocimiento que no todos emparejan con los V6 quisiera saber cual prototitivo V4 tengo que comprar.

[chriszab_DoxaDramas]

I paired three v4 pro. From the middle intercom i hear a bad noise always. Do you know the reason?

[adolfoalcauter]

I got two sets of v4 both buttons just show A and B. Does that mean if I set them all for either letter they’ll still connect the same?

[jkruvi]

Thanks for a wonderful clip. Hopefully they can make the connections easier in the future. After I switched off and then on do I need to press again anything or they connect automatically ??

[terrywigglesworth]

Great video! I know know how to pair but I would like to find a user manual on-line. Nothing came with my set. Where can I find a user manual?

[markociric]

Hi, thanks for the video. Can you tell me how we know the battery level?

[zhonghao]

I was able to connect, however, the 2 V6 both gives very obvious ambient/electrical noise. Also is there a way to reset/clear current settings? Thank you!