5 Free/Cheap Mods for SCX24

Here are some budget friendly modifications/upgrades for the Axial SCX24.

00:00 intro
00:31 mod 1
01:29 mod 2
04:33 mod 3
06:31 mod 4
09:19 mod 5
10:25 conclusion

[anthonycarnathan]

1st tip. Turn the bumper mounts upside down.
2nd tip. Drill your own shock holes and use the longest drive shafts and trim one I do believe. My deadbolt has a longer WB than my gladiator does. By about 10mm

[slushblaster]

nice mods for a platform that everyone has done it all already! there were a couple i never considered. if your going to remove the esc casing might as well coat your board with clear nail polish to waterproof it!

[Mirakov]

Thanks for the bumper idea. My approach was to moved the whole thing inside the body. I drilled away the headlights from the body and attached the bumper to the chassis to be able to open the body without disconnecting the lights. It just required a bit of slightly bent aluminum to move the lights a bit more forward.

[huntinghunter]

Thanks dude those rock lights work great

[Syzygy]

I wonder if you can attach the lights to the chassis behind the wheel well to avoid having to unplug them every time.

[jimbo]

I put the links that came in the box on my yellow jlu, original bottom links go on top, new longer links go on the bottom. Makes the jeep climb way better

[dannyreiter]

This video is great! Keep making them.

[forrestcrabbe]

I run c10 upper and lower rear links on the front of my deadbolt. The c10 comes with headlight buckets hidden behind the stickers so you can make headlights with yer l.e.d.'s 🤘y'all have a badass day🤘🥞🤘

[weedking]

great video as i just got my scx24 deadbolt

[dancearoundtheworld]

use a 1mm drill bit(screws are 1.3mm hex), harbor freight sells a kit with 3 in them

[tanner]

Great video. Thanks for the information

[wnida]

Muy inspirador. Gracias por tus consejos!

[bjmcfarland]

I just changed my servo in my scx24 jeep rubicon and now i have no suspension in the front end.
Is there a fix for this issue.
I have hot racing shocks installed front and back.

[ismaelreynaga]

Hello I’m new to this hobby and just bought one of these myself, what are some websites to buy parts for it ?

[jomorken]

Why clip the pins when you can use a 2 pole female socket, they fit perfet.There are also los of different female pin connectors, so you wouln'd need to even solder that

[snörre]

I don't know about 4, the whole ESC weighs 9 g so to decase this should not have any noticeable influence, removing 1 g (like you say) on a car that weighs about 200-400 (if you have added some weight on the bottom)...

[YZdude]

All i did was shave my fenders and got bigger tires and it's a night and day difference in how it performes.

[djs]

With how common it is for the factory motors to go out I would say the soldering is a dumb idea imo

[hellofromsoutheastalaskarc]

Hello from southeast alaska sweet looking bro

[backdoorfourxrc]

Great ideas here my friend!!🤩👍👍
💢Subscribed💢