How to Fix PULSE OXIMETER MODULE | MAX30100/102

How to fix pulse oximeter module .

for components/ modules

___lets connect____

🄸🄽🅂🅃🄰🄶🅁🄰🄼

🄵🄰🄲🄴🄱🄾🄾🄺

🅃🄴🄻🄴🄶🅁🄰🄼

🅆🄷🄰🅃🅂🄰🄿🄿

#oximeter #arduino #electronics

[shashank]

"Thank you it worked successfully." I have saved lot of time, thank you so much for uploading the video. Keep uploading more videos.

[vijiljoy]

great bro ...!
i was searching for this vdo 🙃👍

[awts_]

Hi, how did you connect the 4.7k resistor to the metal thing on the pcb? did you use any special type of wire

[paragbharadia]

sir i tried it, i had max 30102 same as 2nd one u showed, no led is blinking did your 2nd board worked out fine, can you help sir in any way please?

[sijahak]

Great tip I'm about to start a project ☺️

[eswarelectronics]

Good job want a full tutorial of how to make oxometer with result on display

[ahmadzeghari]

hi friend you showed me that it can be a problem with the sensor producing i have a similar problem but with max30102 black can you help me solve the problem

[andresemiliogonzalezpaez]

Hello! Does this fix work the same on the MAX30102?

[Sieu_Joestar]

Do you have any solution for my GY-MAX30100 sensor sir?
its show "Initializing MAX30100..FAILED: I2C error
" when i use the example "tester" on the MAX30100.lib

[adrianhp]

I'm using a max30102 sensor, is it necessary to solder its pines to make it work?

[Channelnvs]

I've done the same but the led is not glowing, how to fix

[Kamalamai]

led not glowing but shows the i2c adress

[shourjyajitmaiti]

Everything is fine but led is not glowing sometimes it is glowing when I connect USB and is stop glowing when I am putting my finger ...plzz help

[creatvitylight]

Most of the time this type of error r frustrated..