Shur-Line Paint Edger - Cut in Trim Quickly - Does it WORK?

Is this a useful tool or just a gimmick? For me, I find it useful and takes some of the headache away (and hand cramps) from cutting in trim the old way....with a paintbrush. Everyone has their own opinion, but for me, I like having this tool around to speed up my paint jobs around the house!

--

Don't forget to SUBSCRIBE to see videos first, and LIKE this video if you found it helpful!

Questions? Comments? Throw them in the comments below...let's chat!

--

"If it wasn't hard, everyone would do it. It's the hard that makes it great." ~ Tom Hanks

[TERRI]

Ive been a painter for 42 years. This the best tool ever invented for painter's. I use this to cut ALL my ceilings in, and have for 10 years. It takes time to learn and get a feel for it. But once you do you can cut your cut in time by 3/4.

[squeakD]

I used to paint professionally, and was taught how to use a brush to trim, but this is actually a pretty good tool. You have to just keep a few things in mind with this tool. Do not overload it with paint, and definitely brush the excess off like he did prior to placing it on the wall. Do not put too much pressure on it either, just enough to get a clean solid line application. Too much pressure will push the paint out into the guide wheels. Your line is only going to be as straight as the wall you’re against too. Some ceilings can have texture straight to the wall line. This will sometimes be an obstacle, and if you’re not careful, any debris falling from the ceiling edge can end up in your paint line, and don’t rush it either. The tool saves time, but if you’re applying it too fast, it’s easy to get the guide wheels off the line.

[MrMjd]

I really like this tool, have been using it for many years. I have found the best way to put paint on the pad is to put paint in a condiment bottle and squirt the paint on the pad. You can now walk all around the room without the need for a pan.

[jonsidds]

I can say honestly, this is the greatest thing ever made for quick cut in. Hands down .

[mjp]

I just used again, a couple of days ago. Accent walls, cut in inset curved windows and ceilings. Works well and it’s a lot quicker and easier. I just had a problem with the pad sliding off. Mine is getting old. Fixed that with a piece of sandpaper slid under the edges of the pad holders. Worked great.

[phillipsierra]

I just finished using this tool and it works. Pretty much take your time. It definitely lets you skip prepping. I washed it after use to save it for the next home project.

[ghostryder]

U were very helpful. Bought the same edger doing it the way you were by dragging the excess paint off really helped me alot.

[rabbitgregory]

I’ve used this tool but prefer an angled brush. The Edger tool leaves a strip of old paint between the wall and the trim (or the wall and the ceiling).

[bcjr]

Easy way to load with paint... use a squeeze bottle filled with paint... squeeze some paint onto the pad, and you're good to go... no constant dipping (or overdipping) in the pan.... easy and clean.

[spacepd]

Super helpful! I have some wall edges I need to paint and there's no way to get close, but I have a super long telescoping extension rod I can use with the usual threaded end. I need to find these edgers with threads and I'll be in business. Thanks so much!

[skosharocks]

Thanks for the demo! Just what I needed to see. I've been carefully, slowly painting around the bathroom door jamb with a cotton swab, and it's not very straight (not surprisingly)! I found one of these edgers in the garage with a pack of new pads, so here goes nothing!

[a.kay.c]

You don't have to refill it often if you brush the paint on. I love it! :)

[brentscott]

Have used it on flat walls on our sons place and was very pleased with it. Have yet to try it on our knock down texture walls. Have a whole house to paint so will get a good work out. Have the usual olde guy trembling hands and cutting in is a challenge. That was a reassuring video.

[brownwahyu]

I painted for 2nd home back in 2002 since the walls were all white. This helped me to successfully cut in with great success. I feel like this tool helped me to paint near the ceiling better or as good as a professional painter.

[Reno-pzkt]

A lot of painters don't like, I found it to speed up the job in my opinion ...nice video

[rimasproductionz]

Great vid with a great smile, cnt wait for mines to come through the post!!

[doreennewman]

A very lovely "After" job from what I could see.!👍

[jpatalia]

This video does total justice to this edger... making easy for newbies... other are just paint snobs whobdetest this product ... good job

[peterbarlow]

Use your brush to load the pad brushing off the edge. Don’t dip it. You need a brush anyway to get the inside corners. Don’t try to go too far with a load or it will apply too thinly. I use the tilted front edge to swipe down the ridge that tends to squeeze out of the back edge especially if rolling the field is lagging behind.

[johnfilardi]

Great helpful video, bought this used it once for primer, Now we should be more comfortable using it on the finish coat in the corners I hate using a brush my hands are all messed up from holding a brush