Efficient Technology that can replace a CMM for many shops

FREE Aerospace Academy:

CNC Machining is what we do. We are Experts and on this channel we are bringing our knowledge and experience to YOU. Want more? Learn CAD, CAM & CNC Machining through our FREE TITANS of CNC: Academy.

___
___

FREE CNC Machining Academy. Join the Revolution:

Follow us on Instagram:

Like us on Facebook:

Join the conversation on our Facebook Group:

Connect with us on LinkedIn:

Follow our CEO, Titan Gilroy:
___
___

THANK YOU to our Partners who make this content possible:
#CNC #Machining #Machinist

MB017E7JAFBH4VC

[ErostheEpic]

Hopefully those rapid movements aren't moving that unrestrained part.

[evildruid_]

we've been using ogp smartscope like 10 years now.

[bajasoobnut]

Hopefully it's better than the smart scope that I have used in the past at a past employer that insisted in using it to measure some parts in production that were made by punch presses, it would go down all the time and piss off the qc department who had to come out and repair the damn thing and also stop production because of that too

[MRTOMBO]

The ergonomics/use look quite nice. But none of that matters if we don't know what the Accuracy Rating is. In inches (or metric I can do the conversion), what is the +/- Accuracy Rating (e.g. +/- .0001"), and Repeatability Rating?

A high % of our work has a total tolerance of .0002". Off the top of my head I'd expect a tool capable of handling that to have a stated spec of something like +/- .000080. Again, off the top of my head. We often have small features that challenge systems like this. As example, a .005" radius between surfaces. or a small .032H x .020Dia "nipple" on a tip that also has a 30-deg taper for 3/4 of it's height.

Bottom Line: Accuracy Rating? Repeatability Rating?

Thanks for the video.

[Ubicuse]

Great AD :)
But ... for example with this feature - small "pipe" on side - on first measurment it shows 0.250 and on second side it shows 0.249 - i think its to big of a difference.

[dutrajordan]

This is Awsome, how much does one cost?

[VictorHernandez-nttw]

What's the tolerance on this machine?

[fedrgovnykov]

What maximum accuracy of measurements does it have?

[rempat]

can this system automatic generate an inspection report with the file thats used for mesureing the part?

[UriemmanuelJ.A]

Wow how much change in a couple of years 😮!

[jonwebb]

This is something companies like Aberlink have been offering for a long time for a far lower cost with easier to use software. Good looking system though. What's the quoted accuracy and repeatability?

[dominic]

Love these things their great. My first job had one.

[jimclarke]

Be good if the teacher could explain in full with out interruptions

[adityadwi]

Greeting from Molding Manufacturing Indonesia👏 do you have EDM machine??

[marekchilinski]

I have 2 Keyence and Sylvac automatic cameras in my company. Works fine as long as the light in the room is correct, you have relatively flat parts and not go below 0.1 mm shapes (on keyence).

[douglascalhoun]

Amazing to see how technology advances. Is this capable of inspecting internal cuts?

[Helldober]

How accurate is this? If you have a tolerance of +/- 0.01 mm in a hole, is it accurate below a hundred of a millimeter??

[brytongreenwell]

Got one at my work. Hate it. Don't touch the part and re-run it. Will get diff dims. Hard check is king.

[markos.]

That rolling shutter on the camera makes me sweat. Wonder if a global shutter camera makes it better

[moonryder]

I like this! This would help a lot! 😄 Gotta love technology!